ES Windows Custom & Geometric Windows Nationwide | TruePane Windows & Doors

ES Windows Custom & Geometric Windows in West Palm Beach: What to Know First

ES Windows custom and geometric window work in West Palm Beach typically takes 3 to 6 weeks from field measure to install, with most full-frame replacements running $2,400 to $7,800 per opening depending on shape complexity, glass package, and framing condition. We are an independent ES Windows service provider, not a factory branch, which means we quote the work honestly and stand behind it in writing. This page is for homeowners who own ES Windows products, most often the ES7000 or ES Vista series, and need a shaped window rebuilt, resealed, or replaced without losing the architectural line of the house. If you have a window that is fogged, binding, or leaking at the radius, call (561) 264-1279 and ask for a field measure.

Call (561) 264-1279

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a solid aluminum product, but shaped and geometric units carry stress that square windows do not. Here is what we see on service calls across West Palm Beach and how we address each one.

• Radius gasket compression set on ES7000 arch tops. The bent gasket that seals the curved glass to the frame loses memory after years of South Florida heat and humidity. The seal does not tear; it just flattens and lets moisture creep in along the arc. We see this most on east-facing arches that catch the morning sun. The fix is a full gasket pull and replacement with an OEM-profile EPDM, then a water test along the curve before we call it done.
• IGU seal failure on oversized ES Vista picture units. Oversized glass carries more thermal movement between the panes. When the dual seal lets go, the window fogs from the inside and no amount of cleaning fixes it. We replace the insulated glass unit, not the whole frame, whenever the aluminum is still square and the finish is intact. On ES Vista, that is usually the right call and saves the homeowner a thousand dollars or more over a full replacement.
• Frame racking on trapezoid and parallelogram units. Geometric windows installed into openings that were never checked for square will rack over time. The glass is not the problem; the rough opening was off from day one. Dale Kessler has a habit of reading a rough opening before he reads the window, and on ES jobs we pull the interior trim to confirm the frame is plumb before we rebuild anything. If it is not square, plumb, and sealed, it is not done.
• Weep system blockage on radius-bottom windows. ES curved units drain through narrow weep channels that clog with wind-driven sand and salt residue, especially within a mile of the Intracoastal. Trapped water sits against the lower gasket and eventually wicks into the frame. We clear the weeps, flush the track, and where the design allows, open the weep slots slightly and install hooded covers so it does not happen again in six months.
• Hardware and roller fatigue on ES sliding geometric units. Shaped sliders, particularly half-round and eyebrow sliders, put uneven load on rollers. The roller on the taller side wears first, the panel drops, and the lock no longer lines up. We replace rollers as a pair, set the panel height, and adjust the strike so the lock engages without forcing. It is a thirty-minute repair that prevents a cracked corner and a much larger bill later.

Our ES Windows Custom & Geometric Windows Process

1. 1
   Field measure and opening check. We measure every opening twice and check the rough opening for square before anything gets ordered. On geometric units, we template the actual opening, not the old window, because the old window may have been forced into an out-of-square hole.
2. 2
   Parts decision on paper. We lay out OEM versus quality aftermarket options side by side, with prices, lead times, and warranty durations stated. You see exactly what you are buying before we order a single part.
3. 3
   Order and pre-inspection. We order the glass package, frame components, and hardware. When parts arrive, we inspect them at our shop, not on your driveway. If a gasket or corner key is wrong, we catch it before the truck rolls.
4. 4
   Install and seal. We remove the old unit, correct any framing issues, set the new or rebuilt window, and seal it to the rough opening. Shaped units get extra attention at the corners and along the radius, where leaks start.
5. 5
   Water test and adjustment. We run a water test on every shaped unit before we put the trim back. We operate the window, adjust the hardware, and confirm the lock throws clean.
6. 6
   Cleanup and warranty registration. We haul off the old unit, sweep the glass, and register both warranty layers in writing before the truck leaves your driveway. You get the durations stated on paper, not spoken over a shoulder.

What ES Windows Custom & Geometric Windows Costs in West Palm Beach

Most ES Windows custom and geometric jobs we quote in West Palm Beach fall into these ranges, and the spread is real because no two shaped openings are alike.

What moves the price: glass package (impact-rated laminated glass costs more than standard tempered), shape complexity, accessibility of the opening, and how much framing correction the rough opening needs. We give you a written line-item quote before any work starts, and we do not change the number midway through unless you change the scope. Call (561) 264-1279 and we will send a tech to measure and price the job properly.

Why West Palm Beach Homeowners Call TruePane Windows & Doors for ES Windows Work

We have served this community since 2008, and a good portion of that time has been spent fixing windows another company set out of true. Dale Kessler started TruePane in 2008 because he was tired of watching homeowners pay twice for the same opening. We stand behind every ES Windows job with the Done Right Promise and The Keystone Standard, which means both manufacturer warranty layers get registered in writing before the truck leaves the driveway. No paperwork fights, no arguing. Our techs are background-checked, uniformed, and trained on ES Windows specifically, and we quote other lines, PGT, CGI, CWS, and ECO Window Systems, side by side on paper so you can see what you are actually buying. We will be there when we say, and we answer the phone 24 hours a day. Call (561) 264-1279 and a live person picks up.

FAQs