Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Roof Replacement & Installation in West Palm Beach: What to Know First
We replace and install Mr-Glass roof systems in West Palm Beach as an independent service provider, not a manufacturer warranty arm. Most Mr-Glass roof replacement jobs run two to four days from tear-off to final inspection, depending on deck condition and panel count. Pricing is always a written line-item quote before work starts, because a roof is not the place for surprises on the back end.
This page is for homeowners sitting on a Mr-Glass roof that’s reached the end of its service life, or building new and weighing Mr-Glass against other lines. If you want to talk through what you’re seeing, call (561) 264-1279. A live person answers. That’s how we’ve run it since 2008.
How Mr-Glass Products Fail, and How We Fix Them
Mr-Glass builds a sunroom and patio enclosure line more than a traditional composition shingle roof, and that changes how failures show up. Here’s what we find on West Palm Beach jobs:
- Mr-Glass Sunroom Series, panel seam leaks. The extruded aluminum channels that carry the glass panels rely on gasket compression. After enough hurricane-season cycles, the gaskets take a set and no longer rebound. Water doesn’t pour in; it wicks along the channel and shows up as staining near the interior trim. The fix is a full re-glaze of the seam system, not a bead of caulk over the top.
- Mr-Glass Conservatory Roof, flashing separation at the house wall. The roof-to-structure flashing on older Mr-Glass conservatory installs was often a single-layer aluminum transition. In West Palm Beach’s wet season, thermal cycling works that flashing loose. We remove the old transition and install a two-piece flashing with a proper kickout, so water never rides the wall sheathing.
- Mr-Glass Lantern Roof, weep-hole blockage. Lantern roof systems drain through internal weep channels. When leaves, oak pollen, and the fine grit that blows off Palm Beach construction sites clog those weeps, the water level rises inside the frame and leaks at the sill welds. The cure is clearing the channels and, where the factory design allows, opening them slightly to West Palm Beach’s rainfall intensity. Caulk is not the cure.
- Mr-Glass Patio Roof, original panel haze and seal failure. Insulated glass panels in older Mr-Glass patio roofs lose seal integrity slowly. The glass fogs from the inside edge outward, usually starting at the corners. That’s moisture inside the unit, not cleaning water. We replace the sealed units and set them square in the existing channels, because a replacement panel that’s even slightly out of plane will stress the new seal.
- Mr-Glass Studio Roof, frame corrosion at the anchors. Coastal air in West Palm Beach is rough on raw aluminum fasteners. We see anchor points where the frame meets the curb or beam that have corroded to the point of loosening the entire grid. The OEM fix was often the same material that failed. We use stainless anchors and isolation tape where the metals meet, and we record every anchor torque on the job sheet.
Our Mr-Glass Roof Replacement & Installation Process
We work a Mr-Glass roof job like any other roof: measured, planned, set, tested, and documented. Here’s the order of things.
- 1
Call and inspection. You call, we answer. We schedule a walk-through, look at the roof plane, the deck, the drainage, and the existing framing. We measure the opening twice. Always twice.
- 2
Parts decision. For older Mr-Glass panels, we compare OEM replacement units against quality aftermarket lines with equal or better seal warranties. We put both options on paper side by side with prices, so you decide with full knowledge.
- 3
Written quote. One price. Line items. No allowance game, no change-order surprise later. If something changes, we call before we continue.
- 4
The work. Deck prep, flashing, panel set, seal, and anchor. Every panel is checked square, plumb, and sealed before the next one goes in. That’s the rule on the whiteboard and it applies here too.
- 5
Water test and inspection. We run water on the finished roof and watch the drainage paths. If water doesn’t leave the roof the way it should, we correct it before we clean up.
- 6
Warranty registration and cleanup. Both warranty layers get registered in writing before the truck leaves the driveway. Glass scrap, old sealant, packaging: gone. The roof is done when the ladder is back on the rack and you’ve walked it with us.
What Mr-Glass Roof Replacement & Installation Costs in West Palm Beach
Here’s the straight talk. A full Mr-Glass roof replacement in West Palm Beach is a panel-by-panel job, and the range reflects panel count, glass type, and how much framing can be salvaged.
- Single panel or small section replacement: $600 to $1,400 per panel, depending on glass thickness and coating.
- Partial Mr-Glass sunroom roof re-glaze (seam and gasket work): $2,500 to $6,000.
- Full Mr-Glass conservatory or sunroom roof replacement: $14,000 to $38,000, driven by panel count, glass spec, and deck condition.
- New Mr-Glass-style roof installation (studio or lanai build): $22,000 to $55,000, depending on size and structural work.
What moves the price: panel dimensions, whether the glass is tempered or laminated, how much deck sheathing needs replacing, and whether we’re matching an existing frame or starting fresh. No one should quote you a roof without looking at it. Call (561) 264-1279 for a free estimate. Written. Itemized. Yours to keep.
Why West Palm Beach Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We’ve been doing this work since 2008, and the people on our trucks grew up in this trade. Dale Kessler founded the company on a rule his father taught him re-glazing storefronts along Dixie Highway: if the pane is not true, the job is not done. That rule applies to a roof system as much as it does to a front door.
Every Mr-Glass job carries the Done Right Promise. If something isn’t right, we make it right. No paperwork fights. No arguing about who tightened what. We also register both warranty layers in writing before we leave, so you’re not relying on anyone’s memory of what was promised.
And when Mr-Glass panels aren’t the right answer, we quote what is. We’re authorized installers for PGT, CGI, CWS, and ES Windows among others, so if an impact-rated panel makes more sense for your West Palm Beach opening, we’ll show you that option side by side.
FAQs
We are an independent Mr-Glass service provider, not a manufacturer warranty center. If your roof is under manufacturer warranty, we’ll help you document the failure and pursue the claim. If the warranty has lapsed, we’ll quote the replacement work directly.
Yes. We match panel thickness, glass type, and frame profile, and we can source OEM Mr-Glass replacement units when they’re still available. When OEM lead times or prices don’t make sense, we quote a quality aftermarket panel with equal or better seal warranty in writing, so you see the difference before you choose.
Most jobs run two to four days. The variables are how much deck repair is needed and whether we’re matching an existing frame. We’ll give you a schedule in the written quote, and we’ll be there when we say.
That depends on the condition of the frame and what you want the space to do. Some Mr-Glass frames are worth saving and re-paneling. Others have corroded to the point where a new system from PGT, CGI, CWS, or ES Windows makes more sense long-term. We’ll show you both options with real numbers and let you decide. Call (561) 264-1279 and we’ll get eyes on it.
Yes. Roof replacement and structural work in West Palm Beach requires permits, and we pull them. We schedule the inspections and we don’t call the job done until it passes.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.