Garden Windows

Garden Windows in West Palm Beach, FL | TruePane Windows & Doors

A garden window is a projecting, box-style impact window with glass on three sides and a built-in shelf base. In West Palm Beach, FL, homeowners use them over kitchen sinks, in breakfast nooks, and in bathrooms where natural light is scarce but wall space is tight. The shelf turns a window into usable display space for orchids, herbs, or cookware. TruePane Windows & Doors installs garden windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and we build every order to Florida’s High-Velocity Hurricane Zone code. Call (561) 264-1279 to talk through sizes and glass packages.

Call (561) 264-1279

Product Overview - Garden Windows

Garden windows solve a problem Florida homes have in abundance: bright sun without a big footprint. A garden window pushes outward from the wall plane, typically 12 to 24 inches, and carries glass on the left, right, and front faces. That creates a bay-like projection that gathers morning and afternoon light from angles a flat window never sees. The shelf base is the point. It gives you a permanent ledge for plants or a place to stage glassware, and because the unit is fully glazed, it reads as a display box rather than a bump-out.

On the engineering side, this profile earns its place in hurricane-prone construction through laminated impact glass on every pane. The glass package is what separates a real Florida garden window from a decorative sunroom unit. TruePane Windows & Doors supplies these in aluminum or vinyl frames, with the frame selected for the wall depth and exposure of the specific West Palm Beach home. We order and install the same garden window profiles for coastal condos, 1950s ranch homes in Flamingo Park, and newer builds in Palm Beach Gardens, because the performance requirements in this wind zone do not change with house style.

Technical Specifications

Every garden window we quote is configured per opening, not pulled from stock. Here are the core specifications we work with in West Palm Beach:

• Frame materials: Aluminum or vinyl, chosen for wall depth, exposure, and architectural fit
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass
• Finish options: White, Almond, Bronze, Black, and Tan
• Sill option: Shelf sill as standard on this profile
• Design pressure: Matched to your specific wind zone, up to +/-100, never higher than the opening requires
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers issued per configuration, verified on your written quote
• Code baseline: Engineered to Florida Building Code High-Velocity Hurricane Zone requirements

Sizes are custom to the rough opening, which matters on older West Palm Beach homes where wall framing rarely matches a catalog dimension.

Hurricane & Compliance Performance

Garden windows are a projecting product, so the hurricane standards apply to every face, not just the front glass. Here is what governs this unit:

Laminated Impact Glass
Every pane carries a PVB (polyvinyl butyral) interlayer. When impact occurs, the glass may crack, but the interlayer holds the broken pieces in the frame rather than letting them enter the house. That containment is what keeps a breach from pressurizing the structure.

Miami-Dade NOA / Florida Product Approval
Approval numbers are issued per configuration, meaning the exact glass-to-frame-to-anchorage combination on your quote carries its own documentation. We verify the specific NOA or FL Product Approval number on your estimate before the permit package goes to the building department.

FBC/HVHZ Compliance
The unit is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That is the controlling standard for West Palm Beach and Palm Beach County, not a generic coastal wind code. Your permit reviewer will look for this designation.

TAS Testing Context
HVHZ-rated garden windows are tested under the TAS protocol family. That includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. We mention these so you can read a product approval sheet and know exactly what you are looking at.

Design Pressure for Your Wind Zone
Design pressures are matched to the wind zone of your specific West Palm Beach address, up to +/-100, and never higher than the opening requires. Correct DP matching means you are not paying for over-engineering, and not under-protecting a corner exposure.

Energy Performance
Low-E and insulated glass options are available on this profile. For a west-facing kitchen in West Palm Beach, the Low-E package reduces heat gain through the glass without changing the visual character of the garden window.

Color & Glass Options

The five finishes we order most often for West Palm Beach homes are White, Almond, Bronze, Black, and Tan. White and Almond work on coastal cottages and the Mediterranean stucco that dominates neighborhoods like El Cid and Southland Park. Bronze and Black are increasingly common on modern exterior palettes, and they frame the glass in a way that feels more like a picture window than a sunroom accessory. Tan bridges the two, blending with sand-toned stucco and darker trim.

Glass selection depends on how the room is used. Clear laminated impact glass gives you the truest light and the cleanest view. Tinted glass cuts glare on southern exposures. Low-E insulated glass is the right call when the window faces direct afternoon heat and the room is air-conditioned all day. All glass options on this garden window carry the laminated impact interlayer, so the choice is about comfort and light, not protection.

Installation by TruePane Windows & Doors in West Palm Beach

How a garden window is installed in West Palm Beach matters more than the brand on the glass. This product projects from the wall, so it carries wind load on three faces and dead load on the bottom shelf. A unit that is not set level, plumb, and square will bind, sag, and eventually leak.

Our installers start with a pre-install inspection of the rough opening, including the header condition and the exterior wall plane. Older West Palm Beach homes rarely have perfectly square openings, so we measure both diagonals and shim the frame to true before the first fastener goes in. The perimeter is sealed with AAMA 812 low-expansion foam, then flashed and caulked on the exterior in a sequence that follows AAMA 2400/2410 installation practice. The final step is a water test on the sill and corners, then interior trim and cleanup.

We also understand the permitting side of an HVHZ jurisdiction like Palm Beach County. Your garden window may require a Miami-Dade NOA or Florida Product Approval submittal with the permit application, and we prepare that documentation as part of installation. Improper installation compromises the NOA-rated system, and no product approval covers a sloppy opening. That is exactly why we do not subcontract this work to general labor crews. The team that measures your West Palm Beach opening is the team that sets the frame.

Frequently Asked Questions - Garden Windows

What wind zone / design pressure is the Garden Windows rated for?
Design pressure is matched to the wind zone at your specific West Palm Beach address, up to +/-100, and never higher than the opening requires. We confirm the exact DP on your written quote before you order. Call (561) 264-1279 and we will calculate it from your address and opening size.

What is the lead time?
Most garden windows in West Palm Beach run four to six weeks from approved deposit to arrival at our shop, depending on the frame material and glass package. Custom sizes and less common finishes can push toward eight weeks. Ordering window first, then scheduling installation, is the smoothest path.

Does it require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes, in nearly every municipality within Palm Beach County, the garden window needs a NOA or FL Product Approval number listed in the permit package. We pull the correct approval sheet for your exact configuration and include it with the permit application. Call (561) 264-1279 and we will tell you exactly what your particular project will require.

Can I customize the size or configuration?
Garden windows are ordered to the rough opening, not picked from three stock sizes. The projection depth, shelf placement, and vent configuration can all be adjusted within the structural limits of the profile. Bring us the opening dimensions and the look you are after, and we will spec the largest practical unit for the wall.

How do I maintain the frame?
Rinse the exterior glass and frame faces with a garden hose every few months, and check the shelf drains at the base so water never pools. In coastal West Palm Beach air, aluminum frames benefit from an annual wipe-down with mild soap and water to remove salt film. The shelf drains are the one part to watch, because a blocked drain turns a dry window into a puddle.

Get a Quote - Garden Windows in West Palm Beach

TruePane Windows & Doors supplies and installs garden windows for kitchens, baths, and reading nooks across West Palm Beach, FL. Call (561) 264-1279 to schedule a free on-site measurement, or send us your opening dimensions and we will prepare a written line-item quote with the exact NOA-approved configuration for your wind zone. Estimates are free, and the conversation starts with your wall, not a catalog.

Written by the team at TruePane Windows & Doors, serving West Palm Beach, FL.