Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across South Palm Beach
A custom window or door replacement in South Palm Beach typically runs $1,850 to $6,400 per opening, and a full luxury condo retrofit with impact glass on a barrier island unit lands between $28,000 and $74,000. Most of what drives that price isn’t the glass. It’s the salt air, the 50-year-old aluminum frames, and the current building codes along this quarter-mile strip between the Atlantic and the Intracoastal. Our Custom Windows & Doors teams work this town weekly, and we know exactly which openings will fight back. If you want a real number for your unit, call (561) 264-1279. We’ll walk every opening, measure twice, and quote the coastal spec in writing before you spend a dime.
Why South Palm Beach Condos Need a Different Window Company
South Palm Beach isn’t like building inland. A standard aluminum window frame that holds up fine in West Palm Beach will start pitting and binding within five years here, because the salt hits it from both directions. Atlantic spray off the ocean beats the east face of every building on South Ocean Boulevard. Brackish Intracoastal air works the west side all afternoon. The result is corrosion at the jambs, white blooms along the sills, and sliding door tracks that seize up entirely within a decade of installation. Most contractors in the county know single-coast salt exposure. Very few understand dual-coast exposure, and that’s the difference between a window that lasts 25 years and one that fails its first hurricane season.
Dale Kessler founded TruePane in 2008 because he kept walking into South Palm Beach condos where the same cheap window had been replaced twice, and the homeowner was about to pay for a third round. Our crews are trained to inspect the rough opening, check what the salt has done to the structural frame, and specify marine-grade hardware before we ever order a single piece of glass. That’s why condo boards along A1A and the older high-rises off Oceanfront Way keep calling us back. We deliver a square deal, and we register every warranty in writing before the truck leaves the driveway.
Our Custom Windows & Doors Services in South Palm Beach
Commercial Storefront Glazing
South Palm Beach’s ground-floor commercial spaces and condo lobby entries take constant wind-driven salt from the ocean side, and their original aluminum storefront frames from the 1970s and 80s are typically corroded at every mullion joint. We replace those frames with thermally broken aluminum or marine-grade stainless systems, then set impact-rated storefront glass that meets Miami-Dade NOA certification. For lobby doors on oceanfront buildings, we specify concealed closers and stainless hinges because painted steel hardware is rusted solid within three years here.
Oversized Glass Panels
Oceanfront and Intracoastal-facing units in South Palm Beach often have 8 to 12 foot wide glass openings that no stock window comes close to filling. We’ve set impact-rated laminated panes weighing over 400 pounds in upper-floor condos along South Ocean Boulevard, using suction rigging and field-measured templates cut to the exact rough opening. On the original 1970s buildings, those openings are never square anymore. Building settlement plus decades of salt working on the concrete means the glass has to be cut to the actual dimensions, not the blueprint dimensions. There’s no second chance with a panel that size.
Architectural Grilles & SDLs
Many South Palm Beach condo associations require visible divided lites or simulated divided lites to keep every elevation looking uniform, especially on buildings that haven’t updated their windows since construction. We fabricate and install SDL bars in impact-rated units so the exterior look matches the original aesthetic while the glass itself meets current wind-borne debris requirements. The bars are applied between the glass panes, sealed at both ends, and never exposed to the salt air directly, which means no corrosion and no rattle on the oceanfront units.
Curtain Wall Systems
The newer high-rises on the south end of South Palm Beach use curtain wall systems that tie multiple floors of glass together with aluminum mullions and structural silicone. Salt and condensation work their way into the gaskets over time, and once a curtain wall starts leaking at a mullion joint, the water travels down through the building envelope. We inspect those systems floor by floor, replace failed gaskets and setting blocks, and rebuild corroded mullion anchor points with stainless hardware. Most curtain wall failures on this strip are predictable, and they follow the same pattern: east-facing elevations fail first, west-facing second, north and south elevations years later.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Palm Beach
We stock installation hardware and replacement parts sized for the brands most common in South Palm Beach condos. That includes ES Windows, and we’re an authorized installer for more than a dozen manufacturer lines. When a 1970s Andersen gliding door in a South Ocean Boulevard unit needs new rollers and a replacement sash, we don’t order from a catalog and wait three weeks. Our techs keep the common roller assemblies, balance springs, and weatherstripping profiles local to this area on the truck. You call, a live person answers, and the parts arrive for the first visit, not the third.
Common Custom Windows & Doors Problems We See in South Palm Beach Homes
- Fogged glass in oceanfront units within five years of installation. Salt-laden moisture attacks the perimeter seal of a dual-pane IGU, breaks the argon fill, and leaves fog between the panes. In South Palm Beach, a window set without proper marine-grade sealant and stainless setting blocks will fail its seal years ahead of schedule.
- Sliding door panels that won’t move on the ocean side. The original aluminum tracks in 1960s and 1970s condos corrode until the roller path is rough and uneven, and the screws holding the track shear at the head. We regularly drill out and re-tap those openings before setting the new impact door.
- White corrosion blooms along jamb and sill. Constant salt spray from the east and brackish air from the west creates the pitting that causes sashes to bind and frames to lose their weathertight seal. The fix is not new weatherstripping. The fix is replacing the frame and upgrading the hardware to stainless or hot-dip galvanized.
- Water intrusion at the sill track during heavy storms. The original weep holes on 40-year-old aluminum sliding doors clog with salt and sand, then water backs up over the track and into the unit. We correct the slope, widen the weep channels, and flash the jamb entirely before setting the new door.
Pricing for Custom Windows & Doors in South Palm Beach, FL
A standard custom window replacement in South Palm Beach starts around $1,850 per opening for a small fixed unit with standard glass, and moves up to $3,900 for a large impact-rated casement or picture window with SDL grids. A full oceanfront sliding door replacement, including old frame removal and stainless hardware, typically lands between $6,500 and $12,400 depending on opening width. Oversized glass panels, curtain wall repairs, and full condo stack replacements run higher. What lifts the price here versus inland is the material spec: marine-grade stainless fasteners, hot-dip galvanized anchors, and sealed jamb flashing are not optional on a barrier island. Skip them and you’ll pay for the job twice within a decade. Call (561) 264-1279 for a written line-item quote on your exact openings. Estimates are free.
We Also Serve Cities Near South Palm Beach
Our crews work the full barrier island and the mainland neighborhoods around it. If you own a unit in West Palm Beach, Westgate, Lake Park, or Palm Beach Shores, we bring the same coastal window spec and the same Done Right Promise. This page is written for South Palm Beach, but the salt air doesn’t stop at the town line, and neither do we.
Serving South Palm Beach, FL - Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in South Palm Beach
South Palm Beach sits on a quarter-mile-wide barrier island with salt air on both sides, so the hardware we specify here costs more than the inland spec. Marine-grade stainless fasteners, hot-dip galvanized anchors, and sealed jamb flashing add roughly $180 to $410 per opening compared to the standard aluminum hardware used in Boynton Beach. The higher cost is in materials and field labor, not markup. Skip the marine spec and the frame starts corroding within a few years, especially on east-facing units along South Ocean Boulevard. Call (561) 264-1279 for a breakdown of the coastal spec versus the standard spec on your exact openings.
In most South Palm Beach condos built before 1985, the original aluminum frame is too corroded to accept new glass, so a full frame replacement is usually required. On a 1970s oceanfront unit, the aluminum track has frequently pitted so badly that the panel binds, and the steel screws holding the track down have sheared. Once we pull the old door, we often have to drill out and re-tap the rough opening before any new impact unit can be set. If your frame is still square and the corrosion is only surface-level, glass-only replacement is possible, but on a dual-coast building it’s rare. We’ll tell you straight after a site visit, and the quote is free.
Florida’s SB 4D law, passed after the Surfside collapse, requires structural milestone inspections of condo buildings 25 years old or older, or 30 years if within three miles of the coast. South Palm Beach’s entire stock of 1960s through 1980s high-rises falls under that law, and many boards are already receiving inspection reports that flag original single-pane windows and sliding doors as non-compliant. The result is a surge of full-floor and full-building replacement projects at a pace this town hasn’t seen before. If your board has received a milestone inspection report, we can coordinate the window replacement schedule with the structural engineer’s timeline. Call (561) 264-1279 and ask for Dale. He’s worked these buildings for years.
For a South Palm Beach oceanfront condo, a casement window seals tighter than a double-hung, because the sash compresses against the frame with a continuous gasket and locks at multiple points. A double-hung relies on sliding sashes and brush weatherstripping, which is more vulnerable to wind-driven rain and salt intrusion on the ocean-facing elevations. Casements also hold up better to hurricane wind loads when properly impact-rated. The tradeoff is serviceability: double-hungs are easier to clean from inside a high-rise unit. On this strip, we typically recommend casements or fixed picture windows for the ocean side and reserve double-hungs for the Intracoastal or north-facing elevations.
Fog between the panes means the insulated glass unit’s perimeter seal has failed, and on South Palm Beach, salt-laden moisture is the usual culprit. The seal breaks down faster here because the constant salt air attacks the organic sealant and the aluminum spacer bar at the edge of the glass. Once the seal is gone, argon leaks out, humidity gets in, and condensation forms between the panes. You can’t reseal a failed IGU; the glass unit itself must be replaced. Newer windows using warm-edge spacers and marine-grade sealants resist this far better than the standard sealed units installed inland. Call (561) 264-1279 and we’ll inspect the failed unit and quote a replacement that’s actually built for this environment.
If your South Palm Beach condo still has its original single-pane aluminum windows or a sliding door that binds every July, don’t wait for the next milestone inspection to force the issue. The salt is already working on the frames. Call (561) 264-1279 and schedule a free estimate. Dale Kessler and a TruePane technician will measure every opening, show you the coastal spec on paper, and register both warranty layers before the truck leaves your driveway. Done right, in writing, with a Done Right Promise behind it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving South Palm Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.