Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Window Replacement in West Palm Beach: What to Know First
Andersen window replacement in West Palm Beach typically runs $850 to $2,400 per opening depending on the line, glass package, and whether the frame is salvageable. Most jobs take one day for inserts and two to three days for full-frame work. We are an independent Andersen service provider, not a factory branch, which means we answer to you, not to a production quota.
This page is for homeowners who own Andersen windows and need straight answers about replacement: which series fail in our climate, what it costs, what the warranty actually covers, and who in West Palm Beach can do the work without voiding it. If you would rather talk than read, call (561) 264-1279 and a live person picks up.
How Andersen Products Fail - and How We Fix Them
Andersen builds a good window. We install and replace a lot of them, and we have seen every way the Florida climate finds the weak point. Here are the failure modes we see most often in West Palm Beach homes, by series.
- 400 Series Tilt-Wash: sash rot at the lower corners. The 400 Series wood sash holds moisture against the frame longer than the glass channel allows because our humidity never drops. We see it on east-facing elevations in El Cid and Flamingo Park where morning sun bakes whatever rain sat in the corner overnight. Repair means cutting out the rotted portion and epoxy-consolidating the wood, but once rot reaches the sash corner joint, replacement is the honest fix. We will tell you which one you have, and why.
- 200 Series Perma-Shield: failed glazing bead on the fixed panel. The vinyl bead on the 200 Series fixed units expands and contracts at a different rate than the glass and frame in our heat. After ten or twelve years the bead pulls loose and the unit starts to breathe, which fogs the glass and invites condensation. The fix is a full IG unit replacement, and we register the replacement unit warranty before we leave the driveway.
- A-Series: cracked mullion joints from wind-driven settlement. The A-Series is Andersen’s architectural line, and the joints between fixed and operating units are the weak point. We see cracked mullions on older West Palm Beach builds where the original installer did not flash the rough opening correctly. Replacing the window means pulling the old flashing, correcting the opening, and setting the new unit square before the sealant goes in.
- E-Series (Eagle): aluminum cladding lift at the bottom rail. The cladding on the E-Series is roll-formed aluminum, not extruded, and in coastal air with salt and constant sun it can lift away from the wood substrate. Once water gets behind it, the sash begins to decay from the inside. We do not spot-fix lifted cladding; we replace the sash or the full unit depending on how far the damage traveled.
- Storm door hardware and roller assemblies. Andersen storm door systems, particularly the 3000 and 4000 Series, wear out at the closer bracket and the roller track after about five to seven years of daily use in sand and salt air. We replace the hardware with OEM or better-grade aftermarket, and we adjust the sweep so the door closes square against the frame. A storm door that binds in July is almost always a track issue, not a slab issue.
Our Andersen Window Replacement Process
Every Andersen job we run follows the same discipline. Here is how it goes from first call to final cleanup.
- 1
Call and talk to a real person. You call (561) 264-1279. A live person answers, asks what you are seeing, and schedules the visit. No call tree, no callback form.
- 2
On-site measurement and assessment. We measure every opening twice, check the existing frame for square and level, and identify the Andersen series and component involved. If the glass is fogged, we check the seal date to confirm the warranty window.
- 3
Parts decision made in plain English. We tell you whether the job warrants OEM Andersen parts or whether a quality aftermarket option does the job at a better price. We put both numbers on paper so you can see the trade-off before you spend a dollar.
- 4
Replacement or full-frame work done right. Inserts go in with proper shim placement and backer rod before sealant. Full-frame work gets new flashing and a corrected rough opening if the old one was out of true. We do not caulk over problems and call it done.
- 5
Test. Every new or replacement window gets operated fully: open, close, lock, tilt if it tilts. We check plumb, level, and seal. If the pane is not true, the job is not done.
- 6
Warranty registration on the spot. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway. That is The Keystone Standard, and it is not optional.
What Andersen Window Replacement Costs in West Palm Beach
Andersen replacement pricing in West Palm Beach depends on the line, the glass package, and whether the frame can stay. Here are honest ranges for what we typically see.
- 200 Series insert replacement: $850 to $1,400 per opening
- 400 Series sash replacement on an existing frame: $700 to $1,200 per sash
- 400 Series full-frame replacement: $1,500 to $2,400 per opening
- A-Series or E-Series full-frame work: $1,800 to $3,200 per opening depending on size and finish
- Glass-only IG unit replacement (fogged seal): $350 to $800 per unit
What moves the price: full-frame versus insert, impact glass versus standard, grid patterns, custom sizing, and any rotted framing we find once the old unit comes out. We quote it straight before work starts, and the price does not change unless the framing tells us something we could not see on the first measure. Call (561) 264-1279 for a free estimate on your Andersen work.
Why West Palm Beach Homeowners Call TruePane Windows & Doors for Andersen Work
We have been serving West Palm Beach and the surrounding communities since 2008 through a heritage of craft that started long before the company was founded in 2008. Dale Kessler grew up in Northwood Hills and spent enough summers watching his father re-glaze storefront windows along Dixie Highway to know he wanted to work with glass for a living. He trained in building construction technology at Palm Beach State College, then spent the better part of two decades measuring, setting, and sealing windows and doors across Palm Beach County before starting TruePane.
Here is what that heritage means for your Andersen job. Every replacement is backed by the Done Right Promise: if it is not done right, we make it right, no paperwork, no arguing. We are an authorized installer for more than a dozen manufacturer lines, which means if is not the right answer for your situation, we can quote you, PGT, or CGI side by side on paper and let you decide with your eyes open. And a live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree, not a callback form, not a regional call center. You call, we answer.
FAQs
No. As an independent Andersen service provider, we follow Andersen’s installation specifications and use parts that preserve the warranty coverage that is still in force. We register both manufacturer warranty layers in writing with durations stated before the truck leaves the driveway, so you have a paper trail if anything comes up. Call (561) 264-1279 and we can check your seal dates and tell you exactly what coverage remains.
Most insert replacements happen in a single visit, typically four to six hours for one to three openings. Full-frame work takes two to three days depending on scope. We schedule with punctuality: we will be there when we say, uniformed and background-checked, and the job gets done in the window we committed to. Call (561) 264-1279 for a firm schedule on your job.
If the glass is fogged from a failed seal, replacement of the IG unit is usually the right call at $350 to $800 per unit, and that keeps your frame. If the sash or frame is rotted, inserts or full-frame replacement are the honest fix. We will not sell you a full replacement when a glass unit does the job, and we will not patch a rotten sash with putty and hope. Call (561) 264-1279 and we will tell you which situation you have.
Yes. We regularly replace standard Andersen glass with impact-rated IG units in frames that are still structurally sound. The frame must be checked for square and strength first because impact glass adds weight and wind load. If the frame cannot carry it, we will tell you plainly and quote a full-frame impact window instead. Call (561) 264-1279 for a free assessment.
It covers the workmanship on every Andersen replacement we install. If the window binds, leaks, or does not operate correctly because of how we set it, we fix it within 90 days at no charge. No fine print, no forms that cover neither, no arguing. It is the same standard Dale Kessler keeps on the whiteboard: if it is not square, plumb, and sealed, it is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.