Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMarvin Window Replacement: The West Palm Beach Owner’s Guide
Replacing a Marvin window in West Palm Beach typically costs $850 to $2,400 installed, depending on the series, size, and whether the frame gets replaced or just the sash and glass. We stock Marvin-compatible replacement sashes, glass packs, and hardware on our trucks, and most single-unit replacements are done in one visit. The way most owners find us is simple: a window that won’t close square anymore, condensation between the panes that won’t go away, or a crank handle that spins without moving the sash. That’s a Marvin part telling you it’s done, and in this humidity, it only gets worse.
One thing to know up front: TruePane Windows & Doors is an independent installer and repair shop. We’re not affiliated with Marvin, which means we answer to you, not a manufacturer’s sales quota. We carry OEM Marvin parts when they’re the right call and reputable aftermarket equivalents when they perform equally well for less money. Dale Kessler has been setting and sealing glass across Palm Beach County long enough to know which is which without guessing.
Which Marvin Models This Applies To
We replace parts for the Marvin lines you’re most likely to have in a West Palm Beach home: Ultimate, Elevate, Signature, and the older Integrity line that’s still in thousands of houses built in the 1990s and 2000s. Each series has its own extruded profile, jam track, and corner key geometry, and the parts don’t swap between them. A Signature tilt-latch won’t catch on an Elevate sash, and an Ultimate glazing bead snaps in at a different reveal than an Integrity one.
The fastest way to identify your Marvin series is the corner of the sash frame and the glazing bead profile, or the silver Marvin logo etched on the spacer bar between the panes. If the logo is missing, the first two digits of the serial number stamped on the top edge of the vent panel usually identify the plant and year. We verify all of that on the truck before we quote, so you’re not paying for a wrong part shipped in on a guess.
On OEM versus aftermarket: Marvin’s own replacement sashes and glass packs carry the factory warranty and a perfect profile match. Aftermarket options matter when a line is discontinued or the lead time on OEM runs eight weeks. For most Integrity and older Ultimate units in South Florida, the glass pack itself, the seal, and the hardware are the only things that fail. The extruded sash frame rarely needs replacing unless it’s twisted or the corner keys have pulled apart. We’ll show you both options side by side on paper and let you decide, because that’s how a square deal works.
Signs Your Marvin Window Replacement Is Failing
- Condensation that won’t wipe off the inside of the glass. The insulating glass unit’s seal has failed, and humid Florida air is now living between your panes. The fix is a new glazing pack, not a treatment.
- Sash corners separating or a visible gap at the mitre. The corner keys inside the sash have lost tension. You might squeeze the corner closed with your hand and see movement. That’s the mechanical bond gone.
- Harder cranking or a casement sash that sags. The operator gear and friction hinge stack in coastal West Palm Beach air corrode faster than owners expect. If the sash doesn’t sit square in the frame when closed, the hinge has lost its load rating.
- Spongy roofline push or water staining near the bottom of the frame jamb. This is often a failed glazing tape or a shifting rough opening, where the frame twists and breaks the seal. Tightening screws won’t correct a warped opening.
- Air movement or whistling around the sash at the beach-ward side. Weather-stripping on a ten-to-fifteen-year-old coastal Marvin is shot, the wool pile is matted, and the interlock isn’t snug. That’s not a hinge adjustment, it’s a tear-out of the old gasket and a re-fit.
Replacement Cost & What’s Included
For a Marvin single-sash replacement in West Palm Beach, you’re looking at $850 to $1,500 including labor. A full frame replacement with brickmould and interior casing runs $1,800 to $2,400. Replacing just the glass pack and seal, which is the most common job, sits between $500 and $900 for Marvin-specific units. The range comes down to three things: the size of the unit, whether you have aluminum or wood interior casing, and whether the sash needs new hardware or just glass.
Every quote we write includes the part number, the installed price, labor, pickup and disposal of the old unit, and the warranty duration in plain language. Both manufacturer layers get registered in writing, in your name, before our truck leaves the driveway. That’s The Keystone Standard. If it’s not square, plumb, and sealed when we finish, it’s not done and you don’t pay the balance until it is.
DIY or Call Us?
There’s a safe, honest line here. You can remove the interior stop and check if the sash is sitting straight in the rough opening. You can inspect the glazing bead for cracks and slide a dollar bill through the weather-stripping to test the seal. What you shouldn’t do is attempt to pull a Marvin glazing pack yourself, and here’s why: the glass pack is sealed under factory pressure, and a Marlin sash with a broken seal can still hold a surprising amount of load in the frame. One wrong shim angle and you’ve got a twisted sash, a broken seal warranty voided, and a glass unit that wants to bind in the jamb.
Safety matters too. A Marvin casement sash can weigh 60 to 90 pounds depending on glass and size. It comes out of the frame only after the limits and friction hinges are detached properly. If it lets go, it takes a chunk of frame or someone’s hand with it. If you’re not sure, call (561) 264-1279 and we’ll walk you through what we see on a free estimate.
FAQs
Glass packs typically last 12 to 18 years in Palm Beach County before heat, humidity, and salt air creep past the seal. Hardware on coastal-facing units often fails first, around the 10 to 14 year mark, because the strip hinge stack corrodes and binds. A well-glazed, properly sealed Marvin frame can last 40-plus years, but the replaceable parts won’t make it that long in this climate.
No, a fogged Marvin window can’t be restored with a cleaning or a sealant – the original seal between the panes has to be cut out and a new glazing pack set. That’s a glass replacement, not a repair. We do it with the sash still in the frame when the geometry allows, which keeps the cost down. Call (561) 264-1279 for an exact quote; the estimate is free.
A single-sash or glass-pack replacement on a Marvin is normally a two-to-three-hour visit, and we do most in one trip. Full frame tear-out and re-set with interior casing runs half a day to a full day depending on access and how much of the old trim needs to come out. We’ll give you a written time window before we start, and we’ll be there when we say.
We stock Marvin-compatible glazing packs, tilt latches, crank operators, and lift rails for the most common West Palm Beach series, plus a full line of aftermarket equivalents and parts for Andersen, and Pella when the job calls for them. On older or discontinued Ultimate and Integrity units, we source OEM through our supplier network, usually within a week. The parts are on the truck or they’re coming – either way, you’ll know before you pay.
If your Marvin window is fogged, sagging, or just won’t close square, call TruePane at (561) 264-1279. We’ll look at the unit, give you a written line-item quote, and tell you what’s actually wrong before a single penny changes hands. Free estimates, a Done Right Promise, and a live person who answers the phone every time.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.