Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPly Gem Door Installation: The West Palm Beach Owner’s Guide
Ply Gem door installation in West Palm Beach typically runs $280 to $640 for a professionally installed replacement part, depending on the series and what has failed. We stock the most common Ply Gem door components on our trucks and can usually complete the swap in a single visit. What usually brings a homeowner to this page is a door that has started catching at the header, a strike plate that no longer lines up, or a latch that has gone spongy after years of Florida humidity working on the hardware and the frame alike.
We’re an independent West Palm Beach company. We’re not affiliated with Ply Gem, but we’ve been setting and servicing their door lines across Palm Beach County long enough to know exactly how they behave in this climate. The salt air, the afternoon thunderstorms, and the July heat all take their turn on door panels, weatherstripping, and rollers. The good news is that most Ply Gem failures are repairable with the right part and a square opening, and that’s what we do.
Which Ply Gem Models This Applies To
Ply Gem has produced residential entry doors, sliding patio doors, and hinged French doors under several series names over the years: the Grande, the Premium, the Pro Series, and the Builder line, plus the sliding and hinged units sold through the Mi Windows and Doors channel after Ply Gem folded that brand in. The part you need depends on which family your door came from. A builder-grade swung door from a 2009 subdivision in West Palm Beach shares very little hardware with a 2018 sliding patio door off a PGA National renovation, even though both badges say Ply Gem.
If you still have the original door slab or frame, look for a small white or silver sticker along the hinge edge or the top rail. That sticker carries the series code and the manufacture date, and it is the fastest way for us to match your replacement part. If that sticker is long gone, a photo of the hinges, the latch, and the edge profile sent with your call gets us most of the way there. For Ply Gem specifically, the OEM parts are well-made but sometimes backordered, so we carry both factory pieces and proven aftermarket equivalents for the common failure points. We’ll tell you which one we’d put in our own home and why, and we’ll quote both on paper.
Signs Your Ply Gem Door Installation Is Failing
- The door drags across the threshold. In West Palm Beach, this almost always means the slab has settled or the hinges have worn enough to drop the door out of plane. It’s not just an annoyance; it’s chewing up the weatherstripping and letting conditioned air leak out every hour the AC runs.
- The latch no longer catches cleanly. When the strike plate and the latch are out of alignment by even an eighth of an inch, you either slam the door or it pops open on its own. That gap is also where wind-driven rain from a summer storm will find its way in.
- The door sticks only in July. Ply Gem’s steel and fiberglass slabs hold their shape well, but the wood frames behind them absorb humidity and swell. If the door only sticks in the summer and frees up in January, the frame is moving and the door needs to be re-shimmed, not sanded.
- You can see daylight around the weatherstripping. Walk the door at dusk with the interior lights on. Light at the top, bottom, or latch side means the seal has compressed beyond usefulness. In a coastal market like West Palm Beach, that seal is also your first line against salt air corrosion on the hinges and rollers.
- The patio door is suddenly hard to roll. Ply Gem sliders that have lived near the coast for a decade collect salt and grit in the bottom track and the rollers. Cleaning the track helps for a while, but once the roller bearings freeze or the wheels flatten, the door needs new rollers, and the track may need to be re-leveled.
Replacement Cost & What’s Included
Here’s what we typically see in West Palm Beach for Ply Gem door installation work:
- Hinge replacement and door re-alignment: $180 to $320
- Latch, handle, or deadbolt replacement: $140 to $280
- Weatherstripping and threshold seal replacement: $160 to $340
- Sliding patio door roller and track service: $220 to $420
- Full slab replacement (entry door, same frame): $850 to $1,900
- Complete door unit replacement (slab plus frame): $2,200 to $5,500
The spread comes down to a few honest factors: which Ply Gem series you have, whether we’re matching an OEM part or a proven aftermarket equivalent, and whether the underlying frame is still square. Every quote is line-itemed before you approve anything. Labor and parts are listed separately, and the number on the estimate is the number on the bill. Every job is backed by our Done Right Promise, and The Keystone Standard means both warranty layers get registered in writing before our truck leaves your driveway.
Will the price change once work starts?
No. If our technician opens up the door and finds something the estimate didn’t cover, the work stops, you get a call, and you approve any change in writing before we pick up a tool again. That’s a square deal, and it’s the only way Dale Kessler has ever wanted his name attached to a job.
DIY or Call Us?
Some things an owner can honestly check. You can inspect the weatherstripping for flat spots. You can clean the slider track. You can look at the hinges to see if a screw has backed out. That’s useful, and we’ll walk you through any of it over the phone. What you should not attempt yourself is re-shimming a door frame, replacing hinges on a heavy steel slab, or swapping a tensioned patio door roller. Those jobs can turn a $200 problem into a broken glass panel or an injured hand, and the factory warranty on a Ply Gem door is void if the work wasn’t done to the manufacturer’s installation spec. If the slab needs to come off the hinges or the frame needs to move, call us at (561) 264-1279.
FAQs
A properly installed Ply Gem entry door with good weatherstripping and stainless hinges will last 20 to 30 years in Palm Beach County, though the moving parts (rollers, latches, seals) should be expected to need service every 5 to 8 years in this climate. Coastal salt air shortens that window a bit, so doors within two miles of the Intracoastal will want a look every few years. Call (561) 264-1279 and we’ll give it an honest assessment.
Sometimes yes. A hinge that’s simply loose can often be backed out, re-anchored with a longer screw, and re-torqued without replacing anything, and a latch that’s slightly misaligned can sometimes be cured by adjusting the strike plate. If the part itself is worn or corroded past its working life, we’ll tell you that plainly and show you the difference. Estimates are free, and the answer won’t cost you a thing.
Most Ply Gem door installation work in West Palm Beach, from hinge swaps to weatherstripping to roller replacements, is completed in one to two hours on site. A full slab replacement takes a half day, and a complete unit replacement with frame is typically a one-day job with our two-man crew. We’ll give you a clear time commitment before the appointment and we’ll be there when we say.
We stock the most common Ply Gem-compatible components on our trucks: hinges, latches, handles, weatherstripping, thresholds, and patio door rollers in the standard profiles. Uncommon series-specific pieces or color-matched trim sometimes need to be ordered, and we’ll tell you the lead time up front before you commit to anything. We also carry and service parts for other major lines, including Andersen, and Pella, so if you have a mixed house, one call covers the doors.
Call TruePane for Your Ply Gem Door Installation in West Palm Beach
If your Ply Gem door is dragging, sticking, leaking, or just not latching the way it used to, call (561) 264-1279. A live person answers every call, 24 hours a day, seven days a week. We’ll schedule a time, send a background-checked, uniformed technician, and give you a written line-item quote before any work begins. We’ve served West Palm Beach and the surrounding communities since 2008 with a simple rule on the whiteboard: if it is not square, plumb, and sealed, it is not done.
If the pane is not true, the job is not done. And we stand behind it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.