Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Window Installation: The West Palm Beach Owner’s Guide
ES Windows window installation in West Palm Beach typically runs $185 to $420 per window for labor, depending on the opening and the condition of the existing frame, and most single-unit swaps are completed the same day. We keep ES Windows-compatible hardware, weatherstripping, and balance systems stocked on our trucks because we know what fails first in a coastal climate. Most owners call us the day a window starts binding, whistling, or letting daylight through a gap that wasn’t there last season.
Independent of ES Windows, we’re an authorized installer with years of local service in Palm Beach County. The work is done by our own background-checked, uniformed technicians, and every install is covered by our Done Right Promise. We’re not the cheapest bid, and we don’t try to be. What we offer is a square deal and a job that stays done.
Which ES Windows Models This Applies To
ES Windows builds several series found across West Palm Beach homes, including their aluminum impact lines and their vinyl single-hung and horizontal roller models. The compatibility gotcha we see most often is this: an ES Windows part pulled from a coastal impact-rated unit will not always seat correctly in a non-impact unit of the same nominal size. The frame extrusions differ by about 3/16 of an inch, which is enough to throw off the reveal line and leave the sash out of square. That’s a checkable spec worth knowing before you order a part online.
Identifying the right window installation starts with two things: the manufacturer label on the head jamb, and the glass etching. The label gives you the series code. The etching gives you the glass package and the unit’s make date. We match OEM ES Windows parts when the frame is intact and the homeowner wants a like-for-like replacement. When an OEM part is backordered or discontinued, we quote quality aftermarket equivalents side by side on paper so you see exactly what you’re buying. No surprises, no substitutions made quietly.
Signs Your ES Windows Window Installation Is Failing
- Sash binds or scrapes when you open or close it. This usually means the balance system has worn out or the frame has shifted. In West Palm Beach, the humidity swells vinyl frames just enough to expose a balance that was already on its way out.
- You hear a whistle or feel a draft along the sill on windy days. The weatherstripping has compressed beyond its useful life, particularly on west-facing windows that take the afternoon sun year-round.
- Condensation builds between the panes. That’s a failed seal. The window has lost its insulating gas, and no amount of cleaning fixes glass that fogs from the inside.
- The lock no longer aligns or latches without force. When a homeowner has to lean on the sash to get it to lock, the frame is out of true. Forcing it warps the lock rail and makes the next repair more expensive.
- Water stains appear on interior drywall beneath the window. The window installation has failed at the flashing or the sill dam. In a tropical climate like West Palm Beach, a small weep hole blockage becomes a drywall repair within one rainy season.
Replacement Cost & What’s Included
A straightforward ES Windows window installation in West Palm Beach, removing the old sash and installing new hardware, balances, and weatherstripping, generally runs between $185 and $420 per window. Full-frame replacements run higher, typically $600 to $1,400 per opening, because you’re pulling the entire unit, replacing flashing, and refinishing the interior return. The biggest factor is how far the original install drifted from square.
Here’s the line-item breakdown we give every homeowner before work starts:
- Parts: $40 to $220, depending on OEM versus aftermarket and whether you need balances, rollers, or a full sash.
- Labor: $145 to $200 per window for a single-unit swap, including disposal of the old part.
- Flashing and sealant (if needed): $30 to $90, quoted upfront if we find rot or failed flashing.
- Warranty registration: Included. We register both manufacturer warranty layers in writing before our truck leaves your driveway.
Every price is fixed before we begin. If your job goes sideways because of a hidden issue inside the wall, we stop, show you what we found, and re-quote before touching anything else. That’s The Keystone Standard, and it’s how Dale Kessler has run every job since founding TruePane in 2008.
DIY or Call Us?
You can safely check a few things yourself. Remove the interior stop, look for a manufacturer label on the head jamb, and take a photo of the glass etching. Check whether the sill weep holes are clear of dirt and old caulk. These are diagnostics that help us quote the job accurately over the phone.
We don’t recommend a homeowner attempt a full ES Windows window installation any more than we’d recommend replacing your own brake lines. The balance systems on modern sash packs hold enough tension to break a finger or worse if they release while you’re working. Setting the reveal lines on an impact-rated ES Windows frame takes a level, two trusted hands, and an eye for the original install. That’s why our technicians measure every opening twice before they set anything. Call (561) 264-1279 and let us do it right the first time.
FAQs
A properly installed ES Windows unit in South Florida should give you 15 to 25 years on the glass package and 10 to 15 years on the moving hardware. What kills them early here is not the glass, it’s the constant cycle of sun, salt air, and heavy rain, plus the original install quality. A window set out of true fails its balance system three years early on average. Call (561) 264-1279 and we’ll tell you honestly whether yours was set right.
Often, yes. If the frame is square and the glass package is intact, we can replace the balances, rollers, weatherstripping, or lock hardware without pulling the whole unit. A repair runs significantly less than a full replacement. The moment the frame shows rot or the sash is warped, a repair becomes a temporary patch, and we’ll tell you that before you spend a dollar.
Most single-window installs are done in under two hours, from removal of the old sash to final cleanup and warranty registration. A full-frame replacement runs closer to half a day per window because of the flashing work and interior returns. Most jobs are completed in a single visit.
We stock common ES Windows-compatible balances, rollers, locks, and weatherstripping on our trucks, so most repair appointments are one visit. If your model needs an OEM part we don’t carry, we order it the same day and call you the moment it lands. Either way, a live person answers the phone when you call (561) 264-1279.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.