VLX 80 Fixed / Picture Window

VLX 80 Fixed / Picture Window in West Palm Beach, FL | TruePane Windows & Doors

The VLX 80 Fixed / Picture Window is a non-operable, maximally glazed aluminum frame window built for one purpose: giving you an unobstructed view with nothing in the way. No sashes, no handles, no visible hardware. Just glass, a slim frame, and whatever you want to look at – the Intracoastal, your pool, a garden wall of bougainvillea, or the downtown West Palm Beach skyline. TruePane Windows & Doors is an authorized ViewLux installation partner in West Palm Beach, FL, which means we sell, install, and stand behind this exact product. You get factory engineering, our installation workmanship, and one phone number to call if anything ever goes wrong: (561) 264-1279.

Call (561) 264-1279

Product Overview - VLX 80 Fixed / Picture Window

The VLX 80 belongs to a category of window that architects and homeowners in West Palm Beach, FL increasingly treat as wall art. A picture window doesn’t open, which is exactly the point: because there are no moving parts, the frame can be slimmer, the glass area larger, and the sightlines cleaner than any operable window on the market. The “80” in the name refers to the system’s design generation, not a size, and it reflects a decade of refinement in aluminum extrusion engineering. ViewLux built this series for people who want floor-to-ceiling glass panels that span up to 120 inches wide, with no center mullion breaking the view.

In West Palm Beach, where indoor-outdoor living is a way of life, this window does specific work. It frames a living room view of a lake in Ibis, a second-floor sightline toward the ocean in El Cid, or an interior courtyard in SoSo. It brings the outside in without letting the humidity, wind, and salt air come with it. The frame profile is just 1.97 inches wide, which is remarkably slim for aluminum, and the wall construction uses extrusions with a 0.079-inch metal thickness – substantial enough to hold large, heavy glazing units without deflection, light enough to disappear into the wall.

What makes the VLX 80 different from older aluminum windows is the thermal break. The interior and exterior halves of the frame are physically separated by a non-conductive material, which stops heat from conducting through the metal. That matters in South Florida, where an unbroken aluminum frame gets hot enough to warm the air around it. The thermal break is the single most important engineering detail in this product, and it’s standard on every VLX 80 we install.

TruePane Windows & Doors recommends the VLX 80 to homeowners in West Palm Beach who are replacing old single-pane aluminum windows, building a new home, or renovating a space where the view is the priority. It works in modern homes with flat roofs and clean lines, and it works equally well in traditional or Mediterranean-style homes where large fixed panels let you see the landscape without hardware clutter. Call (561) 264-1279 if you want to see one installed, or if you want us to measure your wall and tell you what’s possible.

Technical Specifications

Here is what the VLX 80 Fixed / Picture Window actually is, in numbers and materials, as installed by TruePane Windows & Doors in West Palm Beach, FL.

• Frame profile width: 1.97 inches (50 mm) – visible frame face is under two inches, which maximizes glass area relative to frame.
• Wall thickness: 0.079 inches (2 mm) – heavier than average for residential aluminum, which improves structural rigidity on large fixed panels.
• Maximum span: up to 120 inches wide per panel, depending on wind-load calculations for your specific site in West Palm Beach and Palm Beach County.
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated, Gray Tint, Black Tint. Glazing is selected based on elevation, energy needs, privacy, and impact requirements.
• Frame finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood. All finishes are baked or anodized for salt-air and UV resistance.
• Opening type: Fixed / non-operable. No sashes, no balances, no tracks, no hinges. The glass is factory-glazed directly into the frame.
• Performance ratings: NFRC-rated for thermal performance when ordered with Low-E glass; AAMA-rated air and water infiltration resistance; wind-load tested to the design pressures required by the Florida Building Code for the West Palm Beach region.
• Hardware: None. That’s the design intent.

This is a product built for architectural spans and open-plan sightlines. When we install the VLX 80 in a West Palm Beach, FL living room, the goal is that nobody ever notices the window itself. They notice the view.

Performance Features

Thermal Efficiency
Aluminum conducts heat roughly 1,000 times faster than vinyl or wood, which is why the VLX 80’s thermal break is the headline feature. The interior and exterior frame halves are separated by a polymer strut, and when paired with Low-E glass, the assembly earns NFRC ratings that meet or exceed Florida energy code for fixed windows. In West Palm Beach’s climate, that means less solar heat gain, a cooler room, and a lower air-conditioning bill.

Acoustic Performance
A fixed window is already the quietest design possible – no sashes rattling, no air gaps at meeting rails. Add laminated glass, which sandwiches a PVB interlayer between two panes, and the VLX 80 meaningfully reduces traffic noise from Okeechobee Boulevard, Military Trail, or Dixie Highway. We have clients in Northwood Hills who installed laminated VLX 80s specifically because their bedrooms faced a busy street. The sound difference is immediate.

Airtightness & Weather Seal
Because the VLX 80 has no operable joint, the only potential air path is the perimeter between frame and wall, which is sealed with AAMA 812 low-expansion polyurethane foam on every joint, not just the ones the installer can reach easily. The result is an assembly with industry-rated air-infiltration values that are effectively zero. No drafts, no dust, no humid West Palm Beach air seeping into the wall cavity.

Waterproofing
ViewLux engineers the VLX 80 frame with internal drainage channels that direct any incidental water to the exterior weep system. Combined with the perimeter foam seal and exterior flashing that TruePane installs per AAMA 2400/2410 standards, this window resists the driving rain West Palm Beach gets every summer without letting moisture into the rough opening. Mist between panes is not a concern because the glazing is factory-sealed in a controlled environment, not on site.

Wind Resistance
In Palm Beach County, windows are structural components. The Florida Building Code requires that every glazed product in the high-velocity hurricane zone withstand wind pressures that would destroy windows sold in, say, Ohio. The VLX 80 is tested and rated for the required design pressures, and when impact-resistant laminated glass is specified, it also meets the code requirements for missile impact – a 2×4 launched at 50 feet per second. That is the standard this window is built to.

Security & Hardware
A fixed window cannot be opened from outside, which makes it inherently more secure than any operable window on a ground floor. The 0.079-inch frame wall and deep glazing bead add physical resistance to prying. If the site calls for additional security, laminated glass is the glass option that holds together under impact rather than shattering. For a waterfront home in West Palm Beach, the VLX 80 with laminated impact glass is about as secure as a window gets without steel bars.

Color & Glass Options

The VLX 80 ships in six frame finishes, and the choice changes the character of the window as much as the glass does. Premium Black is the most requested finish in West Palm Beach right now: it reads as modern, frames a view like a mat around a photograph, and disappears at night. Pure White works on traditional homes, cottage-style homes, and any interior where the goal is light and brightness. Anodized Silver is the honest-metal look – industrial, architectural, slightly cooler than the painted finishes, and it develops a natural patina over time that some clients specifically want. Bronze is a classic South Florida tone that blends with dark-painted aluminum that’s been in place since the 1980s and 90s. Champagne is warm and muted, a good match for soft gray or warm beige exteriors. Teak Wood is a wood-grain powder coat designed to fool the eye at ten feet; we recommend it for homeowners who want the look of wood windows with aluminum’s rot resistance in humid coastal air.

Glass selection is driven by what the window faces and what the room needs. Clear is default, and it’s not a bad choice for a north-facing panel. Low-E is what we specify in nearly every West Palm Beach installation – it cuts solar heat gain while staying visually neutral. Frosted solves bathroom privacy, entryway privacy, or any ground-floor room facing a sidewalk. Tempered is code-required within 24 inches of a door and in certain large-bottom-edge locations, and it’s good practice anywhere a person could stumble into the glass. Laminated is the impact-rated glass that protects your home in a hurricane, and it’s what we recommend for any window in West Palm Beach that faces a pool screen, a long open yard, or the water. Gray Tint and Black Tint are design choices that reduce glare aggressively; they’re favored in media rooms, offices, and west-facing windows where afternoon sun is relentless.

Installation by TruePane Windows & Doors in West Palm Beach

We have been installing ViewLux products in West Palm Beach and Palm Beach County long enough to know something that the average homeowner doesn’t: a great window, badly installed, performs like a cheap one. Aluminum windows depend on perimeter sealing for air-tightness, water-tightness, and thermal performance. If the rough opening isn’t prepped correctly, if the frame is set out of level or out of plumb, if the foam sealant is skipped or under-applied, the NFRC rating doesn’t matter. Even worse, a bad installation can void the manufacturer’s warranty, which means you own every future problem.

That’s why TruePane Windows & Doors installs every VLX 80 to the AAMA 2400 and 2410 standard for installation of windows in low-rise buildings, including the requirements for structural perimeters. Our process starts with a pre-installation inspection of the rough opening. We check the condition of the framing, look for rot or termite damage in the sill area, verify the rough opening dimensions against the ordered window size, and handle any substrate remediation before the window ever goes in.

Then we set the window. We use shims and levels at multiple points; large fixed panels like the VLX 80 can rack if they’re not set level, plumb, and square, and a racked frame puts stress on the glazing and the sealant joints. Once the frame is set and secured, we apply AAMA 812 low-expansion foam to the entire perimeter, not just the visible gaps. In West Palm Beach, where summer humidity sits above 80 percent and thunderstorms roll in with wind and rain, an unsealed or partially sealed perimeter means moist air is moving into your wall cavity, which leads to wood rot, mold, and insulation failure. On the exterior, we flash and seal the frame per ViewLux’s installation guidelines, then run a water test on every opening before we consider it done.

West Palm Beach building codes require permits and inspections for window replacement, and TruePane handles that process for you. We pull the permit, schedule the inspection, meet the inspector on site, and make sure the final panel passes. If impact-rated glazing is specified, the inspector checks the product approval stickers; we leave those on until the inspection is complete, because removing them too early fails the job. Finally, we clean the glass, remove all debris, and walk you through the completed installation. The window should look like it grew out of the wall, and if it doesn’t, we fix it before we leave.

Bottom line: a VLX 80 installed by us gets its full manufacturer’s warranty, and it gets our workmanship warranty on top of that. Call (561) 264-1279 to talk through your project in West Palm Beach.

Frequently Asked Questions - VLX 80 Fixed / Picture Window

What is the lead time for the VLX 80 Fixed / Picture Window?
Typical lead time for the VLX 80 is 3 to 5 weeks from order placement to delivery at our West Palm Beach warehouse. Custom finishes and laminated impact glass add about a week. If your project has a hard deadline – a home sale, a rental turnover, a holiday arrival – tell us upfront and we’ll confirm the factory schedule before you commit. Call (561) 264-1279 for current lead times.

Does the VLX 80 qualify for energy tax credits?
Yes, in most cases. The VLX 80 with Low-E glass meets the Energy Star Most Efficient criteria for the South climate zone, which qualifies the window cost (not installation) for the federal energy efficient home improvement credit, subject to the annual cap and your tax situation. We can provide the NFRC label and manufacturer certification statement you’ll need for your tax preparer, and we do this every year for West Palm Beach clients. Call (561) 264-1279 if you want to confirm eligibility for your specific glass package.

What warranty comes with the Fixed / Picture Window?
ViewLux covers the VLX 80 with a transferable manufacturer’s warranty on the frame, the finish, and the sealed glazing unit, and TruePane Windows & Doors backs our installation with our own workmanship warranty. The exact terms depend on the product line and finish, but you should know that the manufacturer’s warranty is only valid if installation was done to ViewLux’s specifications – which is the standard we build our whole process around. Call (561) 264-1279 and we’ll send you the warranty document before you sign anything.

Can I customize the size?
Yes, within the VLX 80’s engineering limits. The window is custom-fabricated to your opening, with a maximum unsupported panel width of 120 inches. Height is site-dependent because in South Florida the limiting factor is usually wind-load design pressure, not the extrusion. If your wall is bigger than 120 inches wide, we’ll spec a mullion combination using multiple panels, and we’ll run the design-pressure math for your specific West Palm Beach location during the quote process. Call (561) 264-1279 with your rough measurements and we’ll tell you what’s possible.

How do I maintain aluminum frames?
Wash them twice a year with mild soap and water, rinse thoroughly, and dry with a soft cloth. In West Palm Beach, especially near the coast, salt residue should be rinsed off more often because it attracts and holds moisture against the finish. The powder-coat and anodized finishes on the VLX 80 are engineered for Florida sun and salt exposure, so no painting, sealing, or refinishing is ever needed. If you notice any white oxidation forming on a cut edge – rare on a properly installed unit – call us and we’ll inspect it under warranty. Reach us at (561) 264-1279.

Get a Quote - VLX 80 Fixed / Picture Window in West Palm Beach

If you’re planning a new build, a renovation, or a window replacement in West Palm Beach, FL, start with a free on-site measurement and quote from TruePane Windows & Doors. We’ll bring glass samples and finish chips, measure your openings, check your wall construction, and give you a written line-item price. No pressure, no change orders after we start, no surprises. Call (561) 264-1279 and tell us what wall you’re trying to open up.

Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving West Palm Beach and Palm Beach County since 2015.