Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Shingle, Tile & Metal Roofing for West Palm Beach Homeowners
Shingle, tile, and metal roofing in West Palm Beach has to stand up to things most roofs never face: salt air off the Atlantic, afternoon storms that roll in hard from the Everglades, and summer heat that bakes a roof surface past 150 degrees. When a roof fails here, it fails fast. We’re TruePane Windows & Doors, and we’ve spent the last years earning the trust of Palm Beach County homeowners through Dale Kessler’s founding rule: if the job is not done right, it is not finished. If you’re seeing water stains inside, granule loss in your gutters, or tiles cracked by wind-driven debris, call (561) 264-1279 and a live person will answer.
We are not a franchise operation working its way through a playbook. We’re a local company that hires local, trains apprentices into journeymen, and plans to be in town thirty years from now. That matters when you’re choosing a roofer in West Palm Beach. A warranty is only as good as the company still standing behind it.
What Our Shingle, Tile & Metal Roofing Service Includes
Asphalt Shingle Roofing
Asphalt shingles remain the most common roofing choice in West Palm Beach neighborhoods like Flamingo Park, Grandview Heights, and Southland Park. They handle South Florida’s heat reasonably well when installed properly, but three-tab shingles rarely reach their rated lifespan in our climate. We see premature granule loss, curling at the edges, and nail pops from thermal expansion on a weekly basis. Our crews inspect every shingle roof for underlayment condition, ventilation adequacy, and flashing details before recommending repair or full replacement. If the decking or the underlayment is compromised, we’ll say so in writing, with photos, and quote you a fixed price.
Tile Roofing
Concrete and clay tile roofs are everywhere in West Palm Beach, from the Mediterranean-style homes in El Cid to newer construction in Banyan Lakes. Tile is excellent at shedding water and reflecting heat, but individual tiles crack and shift under wind load and foot traffic. Walkable pressure zones are critical; a roofer who doesn’t know where to step will crack more tiles than they fix. Our technicians are trained on proper tile roof navigation, and we keep common West Palm Beach tile profiles in stock so a repair doesn’t turn into a three-week wait. When we replace a tile roof, we register both warranty layers in writing before the truck leaves the driveway.
Metal Roofing
Standing seam and metal shingle roofs perform remarkably well in West Palm Beach’s hurricane-prone environment. Metal sheds water quickly, resists salt corrosion when properly coated, and can last 50 years or more with the right maintenance. The catch is that metal roof installation is unforgiving: wrong fastener placement, improper panel overlap, or inadequate expansion allowance will cause leaks and oil-canning within the first few seasons. We install and service metal roofing systems with manufacturer-specified fasteners, thermal spacers, and underlayment rated for South Florida’s humidity. If you’re considering a metal roof for your West Palm Beach home, we’ll quote it side by side against shingle and tile options so you can see the real cost difference on paper.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Shingle, Tile & Metal Roofing
We service roofing systems from every major manufacturer serving the West Palm Beach market. Our crews have worked extensively with CWS and ES Windows roofing and skylight integrations, which matters when a roof replacement meets a window or skylight opening. We stock OEM flashing kits and sealant systems for these brands, so we’re not improvising at the ridge line. We also have deep experience with ECO Window Systems roof glazing details, where the roof-to-glass interface is the most common leak point.
If your home has Mr-Glass skylights or any other make, we can help too. Our technicians measure every opening twice and quote manufacturer lines side by side on paper. The brand should not dictate whether the job is done right; the installer does. That’s where the Keystone Standard comes in.
Signs You Need Shingle, Tile & Metal Roofing Right Now
- Water stains on ceilings or walls after a rain. Water travels along rafters and beams, so a stain near the corner of a room may originate from a roof penetration fifteen feet away. The longer the water sits in the attic, the more likely you are dealing with mold remediation on top of roof repair.
- Granules collecting in your gutters or at downspout bases. Asphalt shingles lose granules as they age. When you see a tablespoon or more per foot of gutter run after a storm, the shingle’s UV protection is largely gone. Bare spots will degrade quickly under West Palm Beach’s sun.
- Cracked, shifted, or missing tiles after wind events. A single broken tile may be cosmetic. A field of cracked or slipped tiles means the underlayment is now exposed to direct sun and rain, and tile roofs in West Palm Beach usually have only one waterproofing layer beneath the tile course. Call us at (561) 264-1279 and we’ll send a technician out to assess whether it’s a repair or a larger problem.
- Daylight visible through the roof deck from inside the attic. If you can see pinpoints of light or feel a draft when you’re in the attic, water is already getting in. Do not wait for a visible leak inside the living space; by then, decking rot is usually well underway.
- Rust, corrosion, or loose fasteners on a metal roof. Metal roofs can last 50 years, but they will not if the fasteners back out or the panel coating is compromised. West Palm Beach’s salt air accelerates corrosion. Catching loose fasteners early costs far less than replacing rusted panels later.
Our Shingle, Tile & Metal Roofing Process - Step by Step
- 1
Inspection and documentation. A TruePane technician arrives at your West Palm Beach home in a marked vehicle, uniformed and background-checked. We inspect the roof surface, flashing points, penetrations, attic ventilation, and underlayment from both the rooftop and the attic. Every recommendation is documented with photos, with a written report you keep so you can compare bids apples to apples.
- 2
Written quote with line-item detail. We price the job line by line: materials, labor, disposal, underlayment, flashing, and any structural replacement called for by code. If you are choosing between shingle, tile, or metal, we quote all three side by side on paper. The quote is fixed; the price you agree to is the price you pay, with no surprise line items at the end.
- 3
Permit and code compliance. We pull permits for the job and schedule inspections with the City of West Palm Beach. Our crews are current on Palm Beach County’s High Velocity Hurricane Zone requirements, which are the most demanding roofing codes in the country. A roof installed to HVHZ standard is set for the next storm.
- 4
Removal, decking repair, and installation. We tear off the old roofing carefully enough to protect your landscaping and block walkways with tarps. Any rotted or undersized decking is replaced before we install the new underlayment and roofing. We use manufacturer-specified fasteners and underlayments matched to the roofing type and to West Palm Beach’s humidity profile.
- 5
Final walkthrough and warranty registration. After the job, we walk the roof and the property with you, then register both manufacturer warranty layers in writing before our technician leaves your driveway. The Keystone Standard applies to every roofing job: if it is not done right, we make it right, with no paperwork fights and no arguing. The Done Right Promise covers our workmanship on top of the manufacturer protection.
How Much Does Shingle, Tile & Metal Roofing Cost in West Palm Beach?
A full asphalt shingle roof replacement on a typical 1,800 to 2,400 square-foot West Palm Beach home runs $9,500 to $16,000 depending on shingle grade, underlayment type, and decking condition. Tile roof replacement ranges $22,000 to $38,000 for the same footprint; the spread comes from tile profile, underlayment system (peel-and-stick versus synthetic), and how much of the existing tile can be salvaged. Metal roofing, including standing seam and metal shingle profiles, typically falls between $18,000 and $34,000 on a home of that size. Repairs are a different order of magnitude: a flash repair around a skylight or pipe boot runs $350 to $900, while replacing a 10-by-10 section of tile runs $800 to $1,800 when tiles from the same profile can be reused.
What moves the price: decking replacement, steep or complex roof geometry, chimney or skylight count, and whether the current roof has to be fully stripped to the sheathing. Some West Palm Beach homes have two or even three layers of old roofing; each additional tear-off layer adds labor and disposal cost. How to avoid overpaying: get a written, line-item quote and hold every bidder to the same scope. Our free estimate includes a written scope of work with materials and warranties stated, so you know exactly what you’re comparing.
Shingle, Tile & Metal Roofing Near West Palm Beach - Our Service Area
We serve West Palm Beach and the surrounding communities of home to Shingle, Tile & Metal Roofing in Westgate, and Shingle, Tile & Metal Roofing in Lake Park. We also regularly work in Palm Beach Shores, North Palm Beach, Riviera Beach, Royal Palm Beach, Palm Beach, Palm Beach Gardens, Palm Springs, Greenacres, and Loxahatchee Groves. When you call (561) 264-1279, a live person answers and schedules an inspection usually within a few business days.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Shingle, Tile & Metal Roofing in West Palm Beach
Shingle, tile, and metal roofing are the three dominant roof systems used on West Palm Beach homes. Asphalt shingles are the most affordable and most common; tile offers superior heat reflection and longevity; metal offers the longest service life and best wind resistance. Each has different underlayment, fastener, and flashing requirements that are specific to South Florida code.
An asphalt shingle replacement on a typical West Palm Beach home takes two to four days. A tile roof replacement generally takes five to ten days, depending on whether the tiles are salvageable. Metal roof installation is usually a seven to fourteen-day job. These timelines include tear-off, decking repair, installation, and final inspection.
Small repairs like pipe boot replacement or a few broken tiles run $350 to $900. Repairing a flashing failure around a chimney or skylight typically runs $600 to $1,400. Full section replacements run from $800 for a small shingle patch to several thousand for a tile field replacement. Call (561) 264-1279 for a fixed written quote; estimates are free.
Yes. We service and integrate roofing components from CWS, ES Windows, ECO Window Systems, and Mr-Glass, plus every major roofing manufacturer serving the West Palm Beach market. We stock OEM flashing kits and sealants for these brands, and our technicians are trained on their specific roof-to-glass and roof-to-skylight details. These are the most common leak points on any roof.
A live person answers our phone 24 hours a day, 7 days a week at (561) 264-1279. For an active roof leak during weather, we can typically get a technician to your West Palm Beach home the same day or next morning to tarp the affected area and stop water ingress. We recommend calling the moment you see water; the difference between catching a leak early and waiting a day is often measured in thousands of dollars.
Every TruePane roofing job is covered by the manufacturer’s warranty layers, which we register in writing before our technician leaves the driveway, and our Done Right Promise on workmanship. If something is not done right, we make it right, with no paperwork fights and no arguing. The Keystone Standard requires both warranty layers stated in writing, with durations, so you’re never guessing what is covered.
Move vehicles out of the driveway on the day we start, since we’ll need access for tear-off and material staging. Clear lightweight items from walls and shelves inside; roof work transmits vibration through framing. Cover items in the attic with light plastic sheeting if attic debris is a concern. We’ll provide tarps to protect landscaping and walkways, and we’ll haul all debris same-day or next-day, depending on job size. Rest easy; we handle the yard cleanup, not you.
Schedule Your Shingle, Tile & Metal Roofing Service in West Palm Beach Today
Your roof protects everything under it, and in West Palm Beach, it has to withstand conditions that test the best materials and installers available. Call (561) 264-1279 for a free, no-obligation estimate. A live person answers 24 hours a day, 7 days a week, and you’ll get an honest written quote with fixed pricing, no gray areas, and both warranty layers registered before we leave your driveway. If the roof is not done right, it is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving West Palm Beach since 2008 and local communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.