CWS Sliding & Patio Doors Nationwide | TruePane Windows & Doors

CWS Sliding & Patio Doors: The West Palm Beach Owner’s Guide

We stock and install CWS-compatible sliding and patio door parts across West Palm Beach, with most roller, track, lock, and weatherstripping replacements priced between $180 and $650 installed, depending on the part and the door’s age. Most parts go in the same day our technician arrives, because the truck carries the common CWS failures: roller assemblies, handles, locks, and sill track caps. The way owners usually discover a failed part is simple: the door starts dragging like it’s pushing back, the handle stops catching, or the lock will not throw without leaning your whole weight into it.

Call (561) 264-1279

We are an independent service provider, not affiliated with CWS. What we do is match the part to the door, install it square, and stand behind the work. Dale Kessler grew up in Northwood Hills watching his father re-glaze storefront windows along Dixie Highway, and he still reads a rough opening the way some people read a room: quietly, carefully, and without rushing to conclusions. If it is not square, plumb, and sealed, it is not done.

Which CWS Models This Applies To

CWS built sliding and patio doors under several series names over the years, and the part you need depends on the series and the year the door went in. The most common we see in West Palm Beach homes are the CWS 8000 and 9000 series sliders, along with earlier CWS Estate and Traditions models. The compatibility gotcha: CWS changed roller housing dimensions between the 8000 series and the 9000 series by about 3/16 of an inch, so a roller that looks right will bind or fall out if it is matched to the wrong series. We measure before we order or pull from the truck.

Every CWS door has an identification sticker on the top rail or the interior edge of the door panel, usually visible when the door is partially open. That sticker lists the series, the glass type, and the manufacture date. If the sticker is gone after twenty years of Florida sun, we pull the rollers and measure the housing width and wheel diameter. For most CWS doors, OEM parts are still available for the 9000 series, but quality aftermarket rollers with sealed stainless bearings often outlast the original nylon-wheel parts, especially in coastal West Palm Beach where salt air chews through unsealed hardware. We will show you both options on paper and let you decide.

Signs Your CWS Sliding & Patio Doors Is Failing

• The door drags or requires a shove to move. Worn roller wheels go flat on one side or seize entirely, and the door starts riding on the track instead of the bearings. This is the number one CWS failure we see after ten to fifteen years in Florida humidity.
• The handle moves but the latch will not catch. CWS handles use an internal cam that strips after years of use, especially on doors that have sagged slightly, which forces the latch to work against the strike plate on every close.
• The lock will not throw without lifting the door. This tells us the door panel has dropped out of alignment, which is almost always a roller height adjustment or a worn roller assembly, not a lock problem. Replacing the lock without fixing the roller just burns the new lock out faster.
• You feel a draft or see daylight at the meeting stile or along the bottom. The weatherstripping has compressed or torn, and the interlocking stile has shifted out of plane. A door that leaks air is also leaking cooled air from your AC, which you pay for every month.
• The door rattles in the frame when closed. Loose rollers, worn track caps, or a frame that has settled out of square. In West Palm Beach’s sandy soil and summer heat, frame movement is common, and the fix is adjusting or replacing the roller assemblies, not shimming the door.

Replacement Cost & What’s Included

For CWS sliding and patio door parts in West Palm Beach, here is what you should expect to pay, installed:

• Roller assembly replacement: $180 to $320 per panel, depending on series and whether we replace the track caps too
• Handle and latch replacement: $140 to $260
• Lock replacement: $120 to $240
• Weatherstripping and interlock seal replacement: $160 to $300
• Full tune-up with all of the above: $450 to $650

The range depends on the CWS series, whether the part is OEM or a quality aftermarket equivalent, and how much track cleanup or frame adjustment the door needs. Every quote we give in West Palm Beach is a written line-item price, not a vague estimate. What is included in every parts job: the part, the labor to install it, the adjustment and alignment of the door, and our Done Right Promise. If it is not done right, we make it right. No paperwork fights, no arguing.

DIY or Call Us?

Sliding door rollers and handles are not high-tension parts, and an owner can safely inspect a few things before calling: look at the bottom of the door for flat spots on the wheels, check whether the handle screws are loose, and run your hand along the weatherstripping to feel for tears. Where DIY goes wrong is pulling the door panel without help. A CWS glass panel weighs a hundred pounds or more, and a dropped panel destroys the frame, the track, and often the panel itself. If you are lifting a sliding glass door solo, stop. That is how a $250 roller replacement turns into an $800 door replacement.

If the door drags, the lock will not throw, or you are feeling a draft from the meeting stile, call us at (561) 264-1279. We will send a background-checked technician who carries the CWS parts on the truck, measures every opening twice, and quotes the work before any wrench comes out.

FAQs