Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Impact Windows & Doors in West Palm Beach: What to Know First
We service and replace ES Windows impact windows and doors throughout West Palm Beach as an independent ES Windows service provider. Most repair jobs are completed in one visit, and a full impact window or door replacement typically runs three to five working days from measurement to final walkthrough. Pricing is honest and line-itemed on paper before we start; you’ll know exactly what you’re paying and why.
This page is for homeowners in West Palm Beach who already have ES Windows products, or who are weighing ES Windows against other impact-rated lines, and need someone who actually knows how these units behave after ten years of salt air and hurricane seasons. We are not affiliated with ES Windows, and we do not pretend to be. What we are is a local shop that has pulled apart enough ES Windows frames and sashes to know exactly where they hold up and where they give out. Call (561) 264-1279 and you’ll talk to a person, not a phone tree.
How ES Windows Products Fail - and How We Fix Them
- Roller drag on the ES700 impact slider. The ES700 slider is a solid door, but the factory roller assemblies wear faster in West Palm Beach because fine coral dust and sand work their way into the tracks. Homeowners tell us the door “got heavy” over the course of a year. We replace the rollers with heavier stainless aftermarket carriers and clean the track channel properly, not just wipe the surface.
- Weep-hole clogging on the ES900 casement series. ES900 casements have weep slots that are sized for inland drainage. In West Palm Beach downpours, those slots clog with wind-driven debris and then the frame holds water. That water sits against the interior sill and starts blistering the frame coating. We clear the weeps, adjust the sill pitch if the original install left it level instead of sloped, and touch up the frame coating so the repair does not show.
- Interlock gasket compression set on ES impact single-hungs. The meeting rail gasket on ES single-hung impact windows compresses over time, and once it loses its memory, you get air and water infiltration at the center lock point. The window may still be square, but the gasket is done. We source OEM gaskets where available and high-durometer aftermarket equivalents when the OEM part is backordered, which has been common on the ES1200 line over the last few years.
- Hardware corrosion on coastal-facing ES entry doors. Anything within two miles of the Intracoastal eats brass and zinc hardware fast. ES entry door hinges and multipoint lock strips show pitting and stiffness sooner than the manufacturer’s inland averages suggest. When we replace hardware on coastal ES doors, we spec marine-grade stainless, not the factory’s standard finish. It costs a little more and it lasts noticeably longer.
- Frame bow on improperly shimmed ES picture windows. This is an install failure, not a product defect, but we see it often enough in older West Palm Beach construction to mention it. An ES fixed picture window that was shimmed only at the corners can bow the frame inward, which then pinches the glass and eventually cracks the seal at the glazing channel. We pull the interior trim, re-shim the unit square and plumb, and re-seal it. If the frame is too far gone, we quote a replacement at the same time so the homeowner can decide with numbers in front of them.
Our ES Windows Impact Windows & Doors Process
- 1
You call and describe what you’re seeing. We ask enough questions to know whether we’re likely looking at a repair or a replacement, and we schedule a visit.
- 2
We measure, inspect, and diagnose. A background-checked, uniformed technician comes out, measures the opening twice, checks the existing frame for square and plumb, and tells you plainly what has failed and what it will take to fix it.
- 3
We give you a written quote. You see the line items: parts, labor, warranty registration, disposal. No verbal ballparks, no surprise add-ons later.
- 4
We source the right parts. For ES Windows, we always try OEM first, especially for glass and glazing components. Where OEM is backordered or priced unreasonably, we tell you and quote a quality aftermarket equivalent so you decide with the facts.
- 5
We do the work in one visit when the job allows. Most ES Windows repairs finish the same day. Replacements get scheduled with a clear install date, and we show up when we say we will.
- 6
We test every unit before we leave. Lock operation, roller travel, drainage, seal seating. If it is not square, plumb, and sealed, it is not done. Then we walk you through what was done, register the warranty layers in writing, and leave the work area clean.
What ES Windows Impact Windows & Doors Costs in West Palm Beach
What you pay depends on what failed and whether you’re repairing or replacing. Here are the ranges we quote most often in West Palm Beach:
- ES window hardware replacement (locks, hinges, casement operators): $140-$380
- ES sliding door roller and track rebuild: $220-$490
- ES impact window gasket and weatherseal replacement: $180-$420 per unit
- ES impact glass replacement (seal failure or impact crack): $450-$1,200 per sash, depending on glass size and rating
- Full ES impact window replacement, installed: $1,100-$2,800 per opening
- Full ES impact sliding door replacement, installed: $3,800-$7,500
The West Palm Beach factors that move the number: permitting requirements, second-story access if your home is elevated, how far the frame has drifted out of square, and whether the existing opening was flashed correctly behind the stucco. We will tell you exactly where each dollar goes before you approve anything. Estimates are free, and there is never a charge to have a look. Call (561) 264-1279 to schedule yours.
Why West Palm Beach Homeowners Call TruePane Windows & Doors for ES Windows Work
We have been in this business long enough to know that an impact window is only as good as the last person who touched it. Dale Kessler grew up in Northwood Hills and spent enough summers watching his father re-glaze storefront windows along Dixie Highway to know he wanted to work with glass for a living. He trained in building construction technology at Palm Beach State College, then spent the better part of two decades measuring, setting, and sealing windows and doors across Palm Beach County before starting TruePane. That is the standard our techs work to on every ES Windows job.
Every job carries our Done Right Promise, backed by The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. If it is not done right, we make it right. No paperwork, no arguing. And because we install more than a dozen manufacturer lines, including Andersen, Pella, and PGT alongside ES Windows, we are not going to steer you toward a brand we prefer. We will show you options side by side on paper and let the numbers speak. A live person answers the phone 24 hours a day, 7 days a week. When an ES Windows unit fails, you will reach a person who knows what those words mean.
FAQs
In most cases you can replace the glass alone if the frame is still square and the glazing channel is intact. We quote glass replacement and full-unit replacement side by side so you see the real cost difference, and we tell you honestly when a frame is too far gone to be worth re-glazing. Call (561) 264-1279 and we will take a look at your specific unit.
It should not, as long as the repair uses correctly specified parts and the warranty paperwork is handled properly. That is exactly what our warranty registration process is built for. We register both manufacturer warranty layers in writing on every job, so you have a paper trail that says the work was done to spec.
Common parts like rollers, gaskets, and hardware are usually available same-week. OEM glass orders for impact-rated ES units take longer, often two to four weeks depending on the glass spec and the plant load. If the unit is still weathertight, we will secure it and schedule the replacement. If it is not, we will tell you that up front and talk through temporary options.
You check the seal. In West Palm Beach, the first sign of trouble is usually a cloudy film between the glass layers, which means the seal has failed and the insulated unit is no longer doing its job. You may still have impact protection from the laminating layer, but your energy performance and clarity are gone. We inspect that on every service call and tell you exactly what your glass is still worth.
Both. We service and replace ES Windows impact sliding doors, French doors, and entry doors in West Palm Beach. Door work is often where we see the worst of the coastal corrosion, and the fixes we recommend for a door on the water are different from the fixes we recommend three miles inland. Call (561) 264-1279 and tell us what you are dealing with.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.