Simonton Door Installation Nationwide | TruePane Windows & Doors

Simonton Door Installation in West Palm Beach: What to Know First

TruePane Windows & Doors provides independent Simonton door installation in West Palm Beach, with most swing and French door jobs completed in a single visit. A typical Simonton door installation runs between $450 and $1,400 in this market, depending on the door configuration, frame condition, and hardware selection, and every quote is line-itemed in writing before the first cut is made. We are not a Simonton-authorized dealer, so our job is not to move product; it is to set your door square, plumb, and sealed. If you own a Simonton entry door, French door, or patio door and you want it installed without the usual runaround, call (561) 264-1279 and a live person will answer.

Call (561) 264-1279

How Simonton Products Fail, and How We Fix Them

Simonton builds a better-than-average vinyl door and window line, but every manufacturer has repeat characters in its service history. Around West Palm Beach, salt air, hard afternoon sun, and the seasonal shift from dry to saturated humidity expose weak points faster than a showroom ever will. This is what we consistently see on Simonton door jobs, and what we do about it.

• Simonton Reflections 5500 entry doors - lower panel warping from west-facing exposure. The Reflections 5500 line uses a narrower frame profile than the StormBreaker Plus, which makes it lighter to operate but more reactive to the kind of afternoon sun that bakes the west-facing doors off Village Boulevard and along the Intracoastal. The panel bows slightly, the sweep loses contact at the corners, and the door starts whispering hot air. We rehang or replace the slab on a square jamb, correct the reveal, and reset the threshold so the sweep seats evenly, then test it with a light gap inspection on both hinges, not just the latch side.
• Simonton StormBreaker Plus terrace doors - sill drain clogs in salt-adjacent homes. The StormBreaker Plus is a genuinely strong thermo-plastic line, but its raised-sill drain channels collect shell sand and salt crust in neighborhoods like El Cid, Flamingo Park, and Northwood Shores. When the weep holes clog, water sits in the track, wicks into the bottom rail, and starts a slow oxidation path through the roller hardware. We clear the drains, inspect the roller carriages, replace corroded sets with stainless or sealed bearing aftermarket rollers, and reseal the sill end caps. If the bottom rail has already taken water, we will tell you before we quote so there are no surprises on the bill.
• Simonton Madeira series and the leaking jamb corner on stucco homes. The Madeira series markets itself on deep profiles and decorative glass, but the jamb corner flashing is often the first place caulk fails on stucco-block construction. We routinely see Madeira sidelight assemblies where a contractor caulked the outside leg but left the top corner flashing unsealed, and water tracks down the inside of the jamb for a season before the homeowner sees the paint crimp. Our fix starts with a pinhole moisture check along the jamb, then re-flashing the exterior with the right backer rod and sealant for masonry, not just laying a cosmetic bead over the old one, which we will not do because we would rather fix the leak than hide it.
• OEM roller hardware on older Classic and Prism doors - a false economy on the coast. Simonton’s factory roller hardware is fine for dry climates. In Palm Beach County, where we get dew-heavy mornings and monsoon-season evenings, OEM steel roller assemblies can rust within three or four years of new construction on ground-floor concrete slabs. We quote both options on paper: OEM replacements, which keep the warranty chain fully intact if the door is still under one, and sealed-bearing aftermarket rollers with brass axles that typically outlast the OEM part three to one in a salt-air zip code. You choose, but you choose knowing the trade-off.
• Simonton StormBreaker Plus with the bind-in-July complaint. Vinyl expands in the heat. A StormBreaker door that was set tight against the frame in a Florida winter, when the air is dry and the panel is contracted, will bind against the latch jamb by the time the sidewalk is hot enough to fry an egg. The real cause is not a bent hinge, it is an installer who did not leave the manufacturer’s recommended thermal expansion gap. We rebore and reset the hinges, rehang the door with the proper reveal on all three working sides, and confirm the latch throws smoothly when the afternoon temperature climbs past ninety.

Our Simonton Door Installation Process

Every Simonton door that enters a West Palm Beach home gets the same unhurried treatment, whether it is a straightforward slab replacement off Parker Avenue or a custom arched entry off Flagler Drive. The process is simple because we standardized it years ago and we have not had a reason to change it.

1. 1
   We measure the rough opening, not the old door. Shims settle, jambs shift, and the original framing is rarely still square. We shoot the opening with a laser, note the high and low points, and record them on the work order.
2. 2
   We assess the existing jamb and threshold before touching the new unit. If the sill has dry rot from a failed corner seal, that gets dealt with first. Installing a new door on a soft sill is how you get a callback in six months.
3. 3
   We quote OEM and aftermarket parts options side by side. If your Simonton is still under manufacturer coverage, we order factory-matched hardware and document everything. If it is out of warranty, we present the aftermarket upgrade path with real-world longevity data, and you decide.
4. 4
   We set the door with shims, not gaps. The panel gets hung plumb on both faces, shimmed at every hinge point and the lock stile, and the reveal is set to the manufacturer’s spec, which on Simonton vinyl means leaving room for that July expansion.
5. 5
   We seal the exterior with masonry-grade flashing and the interior with a continuous seal, then test. We run a dollar-bill pull test on the weatherstripping, a level check on the threshold, and open and close the door ten times. If it rubs, it gets reset. If it does not, it gets signed off.
6. 6
   We hand you the paperwork. Both warranty layers registered in writing, durations stated, before the truck leaves the driveway. You get a copy, we keep a copy, and the Done Right Promise covers what the manufacturers do not.

What Simonton Door Installation Costs in West Palm Beach

Here are the numbers as they currently run across Palm Beach County, from homes in Bear Lakes out to the rentals off Belvedere. These are installed prices including labor, hardware, and haul-away of the old unit where applicable.

• Single Simonton entry door, slab replacement: $450 to $850, uninstalled door provided by homeowner or ordered at cost.
• Simonton French door, single unit (two hinged panels): $900 to $1,800, more if the threshold is rotted or the jamb needs a full rebuild.
• Simonton sliding or terrace door replacement: $700 to $1,400, with roller and track service at additional cost if the existing frame is salvageable.
• Custom arched Simonton entry door, new construction: $1,800 to $3,200, more if the opening requires structural modification.

What moves the price on a Simonton job in West Palm Beach is the same thing that moves it everywhere: the condition of what is behind the trim. A square opening takes an afternoon. A rotted jamb, a shifted foundation corner, or a retrofit into a block wall with no existing header takes longer and costs more, and those are the costs we line-item in writing before we cut. Call (561) 264-1279 for a free estimate, and we will put the numbers on paper.

Why West Palm Beach Homeowners Call TruePane Windows & Doors for Simonton Work

We have been doing this work across Palm Beach County for more than four decades through Dale Kessler’s two generations of glazing craft, and we have never once asked a homeowner to trust us on faith. The Done Right Promise means if it is not done right, we make it right, no paperwork, no arguing. A live person answers our phones 24 hours a day, and the technicians we send are background-checked, uniformed, and trained to treat your Simonton door with the same care they would take in their own mother’s house. We also install and service more than a dozen other manufacturer lines, including Andersen, Pella, and PGT, so when a Simonton part is backordered we can show you a compatible alternative on paper instead of leaving you waiting with a door that does not latch. If the pane is not true, the job is not done, and around here, that is not a slogan. It is the standard we measure every install against.

FAQs