Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSimonton Window Installation in West Palm Beach: What to Know First
We install Simonton windows throughout West Palm Beach as an independent Simonton service provider, and most jobs are completed in a single visit. Depending on the line and the opening, a straight replacement runs $350-$900 per window for labor, while full-frame installation with new construction flanges runs higher because it always involves more cutting, shimming, and sealing. This page is for homeowners who already own Simonton windows, or who are pricing them for a West Palm Beach house and want the installation done by a crew that knows how this brand behaves in our heat and our wind. If you want a quote, call (561) 264-1279 and a live person will answer.
How Simonton Products Fail - and How We Fix Them
- Warped sashes on Reflections 5500 double hungs. The vinyl extrusion on this series is thinner than on Simonton’s commercial lines, and after a decade of West Palm Beach afternoon sun on a west-facing wall, the sash rails can bow just enough that the lock no longer meets. We see it most often in neighborhoods like Northwood Hills and Flamingo Park where the original frames date to the 1990s and were never flashed properly. The fix is usually sash replacement, not a whole new unit, and we square the rough opening before we set the new sash so the next one lasts.
- Fogged insulated glass units on the Impressions line. Simonton’s Impressions windows shipped for years with a butyl seal that does not like our wet season humidity swings. When the seal lets go, the argon escapes and condensation builds between the panes. You cannot clean it out, and caulk will not buy you more than a few months. We replace the IG unit with a new one that carries its own warranty, and we register it just like the frame warranty. Nobody at a big-box installer’s counter will mention that second layer.
- Failed balance springs on ProLine and Basics double hungs. The factory-installed block-and-tackle balances on these budget lines wear out faster in coastal air. The symptom is a window that drops when you open it, or a sash that will not stay up. The part costs under $40. The real cost is in the diagnosis, because an untrained installer will sell you a whole new window over a $35 spring. We measure the sash weight and replace the balance with the correct rating, not whatever is on the truck.
- Sticking sliders on the StormBreaker Plus impact line. West Palm Beach homeowners with StormBreaker Plus windows sometimes find the operable panel binds in August. The frame expands in the heat, and if the original installer set the track even an eighth of an inch out of level, the panel drags. This is exactly why Dale Kessler reads every rough opening before anything gets set. We pull the panel, true the track, clean and re-lube the rollers, and reset the panel so it slides with two fingers.
- Cracked exterior capping on older Simonton units with aluminum cladding. Where the aluminum wrap meets the vinyl frame at the sill, salt air from the Intracoastal eats at the joint and the capping lifts. Water sits behind it, and the homeowner sees a brown stain running down the drywall before they see the window problem. We strip the old capping, inspect the rough opening for rot, then recaulk with a high-grade polyurethane that holds up in Palm Beach County weather.
Our Simonton Window Installation Process
- 1
The call. You reach a human being on the phone. We ask which Simonton line you have, what the window is doing, and whether you have the original paperwork. If you do not know the model, we will identify it on site.
- 2
The measurement visit. A background-checked, uniformed technician arrives when we said he would. Every opening gets measured twice: once at the rough opening, once at the finished frame. If the rough opening is out of square past tolerance, we tell you before any glass is ordered, because a new Simonton set into a twisted opening fails the same way the old one did.
- 3
The written quote. We put OEM and quality aftermarket parts side by side on paper, with prices, so you decide with your eyes open. No change orders, no surprises on the final bill.
- 4
The install. We pull the old unit, inspect the opening, repair any rot or termite damage we find, flash and shim the new window to the manufacturer’s spec, and seal it with materials rated for our humidity.
- 5
The warranty registration. Before the truck leaves your driveway, both manufacturer warranty layers are registered in writing with the durations stated. That is The Keystone Standard.
- 6
The test and the cleanup. We operate the window through its full range, check the seal with a smoke pencil where applicable, and leave the job cleaner than we found it. You get the Done Right Promise in writing.
What Simonton Window Installation Costs in West Palm Beach
Here are straight numbers for common Simonton scenarios in our market:
- Replacement sash on a Reflections or Basics double hung: $180-$350 per window
- Insulated glass unit replacement (fogged seal) on an Impressions or ProLine unit: $200-$450 per unit
- Full window replacement, insert installation into an existing square frame: $350-$900 per window for labor
- Full-frame replacement with new construction flange, including trim and weatherproofing: $700-$1,600 per window
- Sticking slider track service and roller replacement: $150-$300 per panel
What moves the price is the opening. A replacement into a square, undamaged rough opening is straightforward. A full-frame job on an old Florida house with rotted sill plates and no flashing is a different trade. We give a written line-item quote before any work starts, and we stand behind it. Call (561) 264-1279 for a free estimate.
Why West Palm Beach Homeowners Call TruePane Windows & Doors for Simonton Work
Dale Kessler grew up in Northwood Hills and spent summers watching his father re-glaze storefront windows along Dixie Highway. He has been measuring, setting, and sealing windows and doors across Palm Beach County for the better part of two decades, and he runs TruePane the way a glazier runs a job: square, plumb, sealed, done. Every Simonton window we install carries both manufacturer warranty layers registered in writing before we leave, plus our Done Right Promise. If it is not done right, we make it right, no paperwork and no arguing. We also service and install Andersen, Pella, and PGT, so if a Simonton line is discontinued or a part is backordered, you are not stuck. A live person answers the phone 24 hours a day, seven days a week. If the pane is not true, the job is not done.
FAQs
No. Simonton’s written warranty covers the product, not the labor, and an independent service provider can install the window without voiding the manufacturer coverage as long as the installation follows Simonton’s published specs. As an independent Simonton service provider, we install to those specs every time and register both warranty layers in writing before we leave the driveway.
Yes, in most cases. Balances, sash locks, weatherstripping, and IG units for the Reflections and ProLine series are still available through our supplier network, and when an OEM part is discontinued, we source a quality aftermarket equivalent and tell you the difference on paper before you pay a dime. Call (561) 264-1279 with your window’s model number and we will check availability while you are on the phone.
Most insert replacements and sash swaps are done in a single visit, usually within two to four hours per window. Full-frame replacements with new construction flanges take longer because the work includes trim, flashing, and weatherproofing, and we schedule those jobs for a full day. We will tell you the expected timeframe on the written quote before the job starts.
Yes. When the work requires a permit under West Palm Beach building code, we pull it and we handle the inspection. You will never be asked to figure out the permit office on your own. If the job does not require one, we will say so plainly and you will not pay for one.
If the frame and sash are square, the seal has failed between the panes, and the glass is the only problem, you need an IG unit replacement, not a whole window. That runs $200-$450 in our market and keeps your existing frame and trim intact. If the frame is warped, the rough opening was installed wrong originally, or two panes have failed in the same unit, a full replacement is the honest call. We will show you the failing parts and explain the difference before you spend anything. Call (561) 264-1279 for an exact quote, and estimates are free.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.