Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterBay & Bow Windows in West Palm Beach, FL | TruePane Windows & Doors
Bay and bow windows are the architectural centerpiece of a room. They project outward past the exterior wall, adding floor space, seating potential, and a wrap of natural light you simply can’t get from a flat window. For West Palm Beach homeowners, the question has always been whether a projecting window can hold up to hurricane season. It can, when it’s built with laminated impact glass and installed correctly. TruePane Windows & Doors has been installing impact-rated bay and bow windows across West Palm Beach for years, and we handle the engineering, permitting, and installation so the finished window is as strong as it is beautiful. Call (561) 264-1279 to talk through your project.
Product Overview - Bay & Bow Windows
A bay window is made of three panels: a large fixed center window flanked by two operable or fixed side panels set at 30- or 45-degree angles. A bow window uses four, five, or even six narrower panels arranged in a gentle arc. The effect is a bowed, rounded projection that changes the entire feel of the wall. Both add usable interior space, a deep sill for plants or seating, and sweeping sightlines across the yard, the street, or the water.
What makes this profile suited to hurricane-prone construction is not just the glass. It’s the way the whole assembly is engineered. Projecting windows sit proud of the wall plane, so they catch wind from three sides at once. Every joint, every mullion, every anchor point has to be built for that load. We fabricate our bay and bow windows in laminated impact glass through our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, configured to the design pressure your West Palm Beach wind zone requires. The result is a window that adds square footage and panoramic sightlines without becoming the weak point in your building envelope.
Architecturally, bays pair well with living rooms, dining nooks, and master suites. Bows suit larger walls where you want a softer, more organic curve. We’ve installed both across West Palm Beach, from El Cid historic homes to new construction in Ibis and Westlake.
Technical Specifications
Every bay and bow window we sell is custom fabricated to the opening. There are no stock sizes here, because projecting windows are structural assemblies, not drop-in replacements. Here’s what you’re selecting from:
- Frame materials: Aluminum or vinyl. Aluminum is the traditional choice for Florida coastal construction for its rigidity and slim sightlines. Vinyl offers strong thermal performance and a lower price point, and modern vinyl extrusions handle HVHZ design pressures well.
- Maximum size: Custom fabricated to the opening. We’ll engineer the mullion reinforcement and anchoring for whatever width and projection your plan calls for.
- Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, clear glass.
- Finish options: White, almond, bronze, black, tan.
- Sill options: Standard sill or seat/shelf sill, which gives you a deep interior ledge for reading nooks and plant shelves.
- Operability: Side panels can be fixed or operable casements, depending on ventilation needs and egress requirements.
Because the window is custom fabricated, you are never locked into a limited size matrix. We build to your architectural drawings or field measurements.
Hurricane & Compliance Performance
Laminated Impact Glass
The core safety feature is a PVB (polyvinyl butyral) interlayer sandwiched between two panes of glass. Under impact, the glass fractures but the interlayer holds the broken pieces in the frame, keeping the building envelope sealed. That’s what stops wind-driven rain and debris from entering your West Palm Beach home after a strike.
Miami-Dade NOA / Florida Product Approval
Each bay and bow configuration we quote carries a Miami-Dade NOA (Notice of Acceptance) or Florida Product Approval number issued for that specific assembly. These are not blanket certifications. We verify the number on your specific quote so your permit submittal is clean.
FBC / HVHZ Compliance
Our bay and bow windows are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. That is the stricter code regime that governs Palm Beach County, so you aren’t getting a product approved for inland use and hoping it works on the coast.
TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family. TAS 201 is large-missile impact, meaning a length of lumber shot at the glass at speed. TAS 202 is cyclic wind-pressure loading, which simulates hurricane gusts pushing and pulling on the assembly thousands of times. TAS 203 is forced-entry resistance. If a product carries HVHZ approval, it has passed this gauntlet.
Design Pressure for Your Wind Zone
We match design pressures to your wind zone, up to +/-100, never higher. There’s a misconception that higher design pressure is always better. It’s not. Over-specifying means heavier frames, more anchoring, and more cost, without a real-world benefit beyond what your zone demands. We engineer to the number your elevation and exposure actually require.
Energy Performance
Low-E and insulated glass options are available for energy performance. Low-E coatings reduce solar heat gain, which matters when a projecting window is catching morning or afternoon sun in West Palm Beach. Insulated glass adds thermal separation that laminated-only configurations don’t provide on their own.
Color & Glass Options
Finish selection for West Palm Beach homes tends to fall along two lines. White and almond dominate the ranch and Mediterranean revival homes across the city, especially where the window trim stays painted. Bronze and black fit the modern coastal builds going up in SoSo and along Flagler Drive, where darker frames help the glass read as a continuous surface. Tan works well on homes with warmer stucco tones, blending the frames into the facade.
On glass, clear laminated impact is the baseline for maximum visible light. Tinted glass cuts glare and heat gain, which matters on east- and west-facing bays. Low-E insulated glass is the best choice for rooms you actually live in during summer afternoons, because it addresses both radiant heat and thermal conductivity. Most bay configurations combine a clear or Low-E center panel with matching side panels, and we’ll help you weigh the cost against the comfort benefit for your specific elevation.
The seat/shelf sill is worth considering in West Palm Beach kitchens and reading rooms. It creates a deep perching ledge that is also functional storage surface, and it makes the added square footage feel more deliberate.
Installation by TruePane Windows & Doors in West Palm Beach
An impact-rated bay or bow window is only as good as its installation. The NOA and Florida Product Approval numbers apply to the manufactured assembly. The moment it’s set into an opening, the installer becomes responsible for anchoring, sealing, and waterproofing it to code. West Palm Beach sits in the HVHZ for good reason, and improper installation is the number one cause of impact window failures we’re called to correct.
Our process starts with a pre-installation inspection of the rough opening and surrounding structure. We check header condition, wall plane flatness, and the sill substrate before anything gets ordered. Once the window arrives, TruePane Windows & Doors sets it level, plumb, and square. A bay window that’s set even slightly out of plane puts stress on the mullions and can bind the operable panels. We don’t rush that step.
Perimeter sealing follows AAMA 812 practice with low-expansion foam sealant, and the full installation stays within AAMA 2400/2410 standards for window installation practice. We finish with a water test on the assembly and a full cleanup of the work area, including hauling off the old window and all packaging.
For West Palm Beach permitting, we know what the local building departments expect in an HVHZ submittal. The NOA or Florida Product Approval number has to match the exact configuration on your permit drawings. We help coordinate that paperwork so your project doesn’t stall at the counter. Coastal exposure, wind zone, and permitting are not afterthoughts here. They’re the starting point of every quote we write.
Frequently Asked Questions - Bay & Bow Windows
We match design pressure to your specific wind zone in West Palm Beach, up to +/-100 and never higher. Your elevation, proximity to the coast, and the window’s position on the house all factor into the required rating. Call (561) 264-1279 and we’ll calculate the correct design pressure for your opening during the free estimate.
Because every bay and bow window is custom fabricated to the opening, lead times run longer than a stock window replacement. The exact timeline depends on the frame material, glass package, and the current fabrication queue at the manufacturer. We’ll give you a written lead time on your quote so you can plan your project accordingly. Call (561) 264-1279 for current scheduling.
Almost always yes in West Palm Beach and throughout Palm Beach County’s HVHZ jurisdictions. Your permit package needs the approval number for the specific configuration being installed. We provide the correct NOA or Florida Product Approval documentation with your quote and help coordinate the submittal. Call (561) 264-1279 to get the right paperwork started.
Yes. Bay and bow windows are custom fabricated to the opening, so panel count, projection depth, angle, glass package, and operability are all selectable. We’ll work from your architectural drawings or take field measurements and engineer the assembly to your design pressure requirements. Call (561) 264-1279 to talk through what’s possible for your wall.
Clean the glass and frames with mild soap and water, and check the weep holes and perimeter sealant annually. Florida’s salt air and intense sun are harder on exterior materials than anything inland. We recommend inspecting the sealant around the roof and side flashing on projecting windows at least once a year, since water intrusion on a bay window usually starts at the top. Call (561) 264-1279 if you notice any sealant cracks or fogging between panes.
Get a Quote - Bay & Bow Windows in West Palm Beach
If you’re planning a bay or bow window in West Palm Beach, start with a free on-site measurement. We’ll assess the opening, confirm your wind zone and design pressure requirements, and give you a written line-item quote with the exact glass, finish, and compliance documentation you need. Call TruePane Windows & Doors at (561) 264-1279 to schedule your free estimate.
Written by the team at TruePane Windows & Doors, serving West Palm Beach, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.