Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Palm Springs
Custom window and door work in Palm Springs usually starts with one question: what’s actually behind that old jalousie frame? In this village, the answer is almost always a concrete block opening that was never built to modern standards. When a homeowner off Lake Worth Road or Congress Avenue calls us about replacing original 1960s windows, they’re not just buying glass. They’re buying a crew that knows what a mid-century CBS house will throw at them once the wall comes open. Call (561) 264-1279 and you’ll reach a live person who can walk you through what a Palm Springs replacement job actually involves, in plain language, before anyone schedules a visit.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Custom Windows & Doors Company
We’ve worked on enough Palm Springs ranches and Florida rooms to know this housing stock intimately. The village is overwhelmingly single-story CBS construction from the 1950s through the 1970s, and nearly every rough opening was cast for jalousie or early aluminum slider units that don’t match any modern manufactured size. Our techs expect that. They arrive prepared to shim, level, and where necessary, cut a new buck into masonry before a frame ever goes in. That’s not a lesson we learned in a training manual. It’s what forty-plus years of glazing work in Palm Beach County teaches you.
Dale Kessler founded TruePane on a rule that still governs every install: if the pane is not true, the job is not done. We carry that into every Palm Springs job, from a simple custom casement to a full wall of impact-rated architectural glass. Our installers are background-checked, uniformed, and measure every opening twice before quoting manufacturer lines side by side on paper. You see exactly what you’re buying, and what it costs, before we touch a wall.
The Palm Springs homeowners we work with tend to have lived in their houses for twenty or thirty years. They remember the contractor who left a fogged seal and a door that binds in July. They’re not looking for the cheapest bid. They’re looking for a company that will still answer the phone if something isn’t right. That’s why TruePane puts both manufacturer warranty layers in writing, registered before our truck leaves your driveway, and backs every install with our Done Right Promise. No paperwork fights. No arguing. If it’s not done right, we make it right.
Our Custom Windows & Doors Services in Palm Springs
Custom Shape Windows
Mid-century Palm Springs homes were often built with odd-shaped openings: trapezoids, circles, half-rounds, narrow clerestory strips. Modern production windows don’t fit those holes. We measure, template, and order true custom units from manufacturers like CGI and CWS, then set them into openings that often need masonry work before the frame can be set. A half-round over a 1965 front entry isn’t a stock item. We treat it as a custom glazing job from the first measurement to the final bead of sealant.
Architectural Grilles & SDLs
If you’re replacing jalousie windows on a 1960s ranch and want to keep the period look, simulated divided lites (SDLs) and architectural grilles give you the sightlines without the thermal penalty of true divided glass. Our Palm Springs customers often pair SDLs with impact-rated units so the curb appeal stays faithful to the original architecture while the performance meets current Palm Beach County code. We order grille patterns from multiple manufacturers so you can compare them on paper before committing.
Oversized Glass Panels
Florida rooms and enclosed porches are everywhere in Palm Springs, and a lot of them were built with walls of jalousie glass that run eight to twelve feet across. Converting that wall to fixed oversized glass or large sliding panels means engineering the lintel, checking the slab, and in most cases, rebuilding the rough opening entirely. We’ve done this work on homes along 10th Avenue North and throughout the village, and we spec each panel for the inland wind zone so you’re not paying barrier-island pricing for a house four miles from the coast.
Commercial Storefront Glazing
For the small commercial properties along Congress Avenue and Lake Worth Road, we handle storefront glazing, curtain wall repairs, and entry door replacement. Commercial work in Palm Springs carries the same compliance reality as residential: Palm Beach County permits and Florida Product Approval apply, and we pull permits and schedule inspections as part of the job. The glass package on a storefront isn’t cosmetic. It’s structural, and we treat it that way.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Palm Springs work we lean heavily on CGI, ES Windows, and ECO Window Systems. Those three lines cover the range most Palm Springs homeowners need: code-compliant impact units at inland wind-zone pricing, high-end custom architectural windows, and energy-efficient replacement packages for older CBS homes. We quote side by side on paper so you can see the difference in real dollars, not sales talk. And because we carry local stock and have supply relationships that go back decades, a custom order for a Palm Springs job doesn’t sit in limbo.
Common Custom Windows & Doors Problems We See in Palm Springs Homes
- Jalousie openings with no wood buck. The 1960s CBS surrounds in this village were often cast without a proper buck. Raw stucco runs right up to the glass. Before an impact-rated frame can be set, the crew has to cut back the stucco, grout in a pressure-treated or composite buck, and only then anchor the new window. It’s an extra labor step crews from larger markets routinely underbid when they first work in Palm Springs.
- Out-of-square rough openings. CBS openings from this era were rarely cast true. A new frame that’s off by a quarter inch will bind, leak, and void the manufacturer’s warranty. We level and shim every jamb before anchoring, and if the opening is too far out, we rebuild it with masonry infill rather than forcing a unit into a hole that’s fighting us.
- Hidden rot and failed waterproofing behind jalousie frames. Jalousie windows have been leaking slowly for fifty years in some of these houses. Once the frame comes out, what looked like a clean opening turns out to have cracked stucco, rusted anchors, or rot in the rough sill. We price for this upfront with a written allowance, and we never start cutting if the homeowner hasn’t approved the number in writing.
- Undersized lintels over wide openings. When a Palm Springs homeowner wants a larger custom window, sometimes the slab and lintel can’t carry the new span without reinforcement. We flag that on the first site visit, not after the wall is open. Opening a wall for a bigger window can trigger a framing upgrade under current Palm Beach County code, and we’d rather tell you that before the permit gets pulled.
Pricing for Custom Windows & Doors in Palm Springs, FL
Here’s what custom window and door work actually runs in this village. A standard impact-rated replacement window, including the masonry buck work most Palm Springs CBS homes require, typically lands between $900 and $1,800 per opening depending on size and manufacturer. A custom shape window, like an arch or a half-round, runs $1,200 to $2,600 because of the templating and the specialty frame work. Architectural grilles and SDLs add roughly $80 to $180 per window depending on the pattern. Oversized glass panels for Florida room conversions start around $2,500 per panel and can exceed $6,000 when new lintels or slab work is required. Every quote includes a line-item breakdown, and we write allowances for hidden masonry and framing work right into the contract, so you’re not hit with an unapproved change order. Call (561) 264-1279 and we’ll give you a free estimate with real numbers, measured against your actual openings, not a generic per-square-foot guess.
We Also Serve Cities Near Palm Springs
Our Custom Windows & Doors team covers Palm Springs and the surrounding communities, including West Palm Beach, Westgate, Lake Park, and Palm Beach Shores. If you’re just outside the village limits and wondering whether we make the drive, the answer is yes. Same crews, same pricing structure, same warranty paperwork. Call us and we’ll tell you straight what your job looks like from where you sit.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Palm Springs
Because nearly all of Palm Springs’s housing stock is mid-century CBS construction, and the jalousie openings in those homes were cast without a proper wood buck. A buck is the frame member that gives the new window something solid to anchor into. Without it, the new unit floats against raw stucco and concrete block, which won’t hold anchors true and will eventually leak. Cutting back the stucco, grouting in a pressure-treated or composite buck, and flashing the opening before setting the frame adds labor to every opening. It’s not a padding line. It’s required for a job that won’t fail. Call (561) 264-1279 and we’ll explain exactly what your openings need, based on the age and construction of your house.
No. Palm Springs is in unincorporated Palm Beach County for permitting purposes, and window and door replacements here require a county building permit and products that carry Florida Product Approval. A contractor who tells you otherwise is setting you up for a code violation, an insurance denial, and a hard time when you sell. We pull the permits, schedule the inspections, and make sure the final inspection passes before we call the job done.
The rough openings are rarely square, and the walls usually weren’t waterproofed the way a conditioned room needs to be. Once the jalousie frames come off a full wall, you’re usually looking at cracked stucco, rusted anchors, and a slab edge that wasn’t flashed for a fixed glass or sliding door system. We price a written allowance for that repair work before the job starts, and we photograph everything we find so you’re making decisions with your eyes, not my word. For an exact number on your Florida room, call (561) 264-1279.
Generally, no. Palm Springs sits four to five miles inland, which puts it in a lower wind-speed design zone than the barrier islands. That means a Palm Springs homeowner can often use a broader range of Florida Product Approved products at a lower price point than a comparable opening in Palm Beach or Lake Park. The difference isn’t huge per window, but across a whole house it adds up. We quote the same house with two or three manufacturer lines so you can see where the savings actually come from.
We write an allowance into the contract before we start, and we point a camera at every opening once the old frame is out. If we find rotted framing, cracked stucco, a missing buck, or an undersized lintel, you see the photo and a written price to fix it before we touch it. We don’t do verbal change orders. We don’t pressure you on the spot. And if the wall is too far gone to fix within the allowance, we stop and recompute. That’s the Done Right Promise applied to the whole job, not just the glass. If you’re planning custom window work on an older Palm Springs CBS house, call (561) 264-1279 and we’ll walk through the process and the numbers before anyone books a truck.
When you’re ready to talk about custom windows and doors for your Palm Springs home, call (561) 264-1279. A live person answers, every time. We’ll set up a free estimate, measure the actual openings, and give you a line-item price in writing. No pressure, no vague promises, no surprises. Just a square deal from a company that’s been doing glazing work the right way for over forty-two years.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and Palm Beach County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.