Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Impact French Doors in West Palm Beach: What They Actually Cost in 2026
Impact french doors in West Palm Beach typically run $4,800 to $9,600 installed for a standard 72×80 opening, with historic-district and custom-sizing work pushing toward $14,000. Material costs sit between $2,400 and $5,200 per door unit depending on the manufacturer line and glass package; labor, permits, and the structural anchoring Palm Beach County’s wind-borne debris code demands account for the rest. Call (561) 264-1279 for a line-item quote on your opening, and we’ll tell you exactly which portion of that range applies to your house before we ever schedule a truck.
The Cost Drivers Specific to West Palm Beach Housing Stock
Most of the homes we measure in West Palm Beach were built between the 1940s and 1980s, and the rough openings in those CBS walls were framed for sliders, not hinged french doors. That means the majority of impact french door installations here begin with structural modification: enlarging the opening, adding a header, and re-anchoring the buck to concrete block. In a newer frame-built house elsewhere in Florida, that step often doesn’t exist. Here, it’s the single largest labor variable on the estimate.
What we see in Flamingo Park and Northwood specifically: original jalousie and single-pane aluminum openings that were never designed to carry the weight of a double impact-rated door panel. Each leaf of an impact french door can weigh 180 to 240 pounds. The frame must be shimmed square, fastened to the block with code-specified anchors, and sealed against the driving rain we get off Lake Worth Lagoon. If the opening is not square, plumb, and sealed, it is not done.
What the Florida Building Code Adds to Your French Door Price
West Palm Beach sits inside Palm Beach County’s wind-borne debris region with a design wind speed exceeding 160 mph. That is a hard requirement, not a suggestion. Every french door we install here must carry a Florida Product Approval number and be anchored to withstand the pressure cycling that code requires. You’ll see a permit line on our estimate. You’ll see the engineer’s anchor schedule. You’ll see the product approval documentation. Those items are not optional, and any contractor who tells you they can skip the permit to save you money is not doing you a favor in a market where Citizens Insurance is already sending non-renewal notices over undocumented wind mitigation.
What You Get at Each Price Point
The spread between $4,800 and $14,000 comes down to three things: the door line, the glass package, and whether your house sits in a historic district. Here’s the breakdown we walk homeowners through on the phone:
| Item | Cost Range (Installed) |
|---|---|
| Standard impact french door, 72×80, mid-grade line (ES Windows, ECO Window Systems) | $4,800 - $6,200 |
| Premium impact french door, 72×80, top-tier line (CWS, Mr-Glass) | $6,500 - $9,600 |
| Custom sizing or oversized opening (wider than 72″ or taller than 80″) | $8,900 - $12,400 |
| Historic district approved unit (simulated divided lights, El Cid / Flamingo Park) | $9,200 - $14,000 |
| Structural opening enlargement from slider to french door | Add $1,200 - $2,800 |
| Permit and Florida Product Approval documentation | $350 - $600 |
These are the numbers we quote in West Palm Beach, not national averages pulled from a website. Labor here runs higher than inland Florida because of the block construction and the code documentation. That’s the square deal: you see every line before we start, and the bill matches the quote when we finish.
Why Historic District French Doors Cost More
If your house sits in the El Cid or Flamingo Park Historic Districts, the City’s Historic Preservation Board must approve any exterior door replacement that changes the visible profile. That means we’re specifying a simulated divided-light impact door that replicates the original muntin pattern rather than a standard impact casement or single-lite french door. The approval process adds six to ten weeks of lead time before the door is even ordered, and the door itself carries a premium because it’s a specialty product, not a stock unit.
We have walked through that process with enough homeowners to know it catches people off guard on their first quote. The door that looked like a $5,500 project becomes a $10,000 project once the divided-light requirement and the board review are factored in. We would rather tell you that on the phone than let you find out at the permit counter. When we quote an historic district job, the Historic Preservation Board submission is already built into the line items.
What We Actually Do on a French Door Install
Dale Kessler grew up in Northwood Hills watching his father re-glaze storefront windows along Dixie Highway, and he’s spent decades since measuring, setting, and sealing doors across Palm Beach County. The process TruePane follows on every impact french door starts before the old door comes out: we measure the opening twice, check the existing header, and confirm the rough opening will carry the new door’s weight without sagging.
Then we pull the old unit, correct any out-of-square conditions in the rough opening, set the new door with code-specified anchors, and seal it. We register both manufacturer warranty layers in writing before the truck leaves the driveway. The workmanship is covered by our Done Right Promise. If something’s off, we come back and make it right. No paperwork fight, no arguing, no fine print that covers neither.
Manufacturer Lines We Quote Side by Side
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. On a french door quote, we typically put ES Windows and CWS next to each other on paper so you can see exactly what the price difference buys: glass tint, hardware finish, frame gauge, and the solar heat gain coefficient that matters when the afternoon sun hits your west-facing patio door in July. You choose what fits your budget and your house. We install either one the same way: square, plumb, sealed.
If you’re still getting your head around the difference between impact glass and hurricane shutters, start with our Door Installation guide, which covers the basics for West Palm Beach homeowners. For a deeper look at what goes into a full Door Installation in West Palm Beach, that page breaks down the permitting and anchoring requirements specific to our code jurisdiction.
Key Takeaways
- Impact french doors in West Palm Beach run $4,800 to $9,600 for standard openings; historic district or custom work can exceed $14,000.
- Structural opening modification is common in 1940s-1980s CBS homes and adds $1,200 to $2,800.
- Florida Building Code requires Florida Product Approved doors with a permit; there is no waiver pathway in Palm Beach County’s wind-borne debris region.
- El Cid and Flamingo Park historic district jobs add 6-10 weeks of approval lead time and a divided-light cost premium.
- Both manufacturer warranty layers are registered in writing before we leave the driveway, and our Done Right Promise covers the workmanship.
Is It Cheaper to Repair or Replace Impact French Doors?
If your existing impact french door has a failed seal, a hardware issue, or a minor alignment problem, repair is almost always cheaper than replacement, often $250 to $700 versus $4,800 and up. We offer a free written repair estimate, and our home page lists our standing repair and tune-up offers. But if the door frame itself has shifted, the glass is cracked, or the original install was never anchored to current code, patching it will cost more in the long run than replacing it correctly once.
Can You Install Impact French Doors the Same Day?
For a straight replacement in a standard rough opening with an in-stock door, yes, most jobs are completed in a single visit. We stock common 72×80 impact french door sizes with ES Windows and ECO Window Systems, and a live person answers our phone 24 hours a day, 7 days a week, so if you call on a Tuesday morning, we can often be measuring by the afternoon. Custom sizing, historic district approvals, or structural opening changes add the lead time described above. Call (561) 264-1279 and we’ll tell you which category your job falls into before you hang up.
Will Impact French Doors Lower My Insurance Premium in West Palm Beach?
In most cases, documented impact-rated doors qualify for wind mitigation credits on your Florida homeowners policy, which is a significant factor in this market. Palm Beach County homeowners are facing non-renewal notices and premium spikes from Citizens and private carriers who want proof of wind mitigation. We provide the Florida Product Approval documentation and the permit record your insurance agent needs to file for those credits. We’re not insurance agents, and we won’t promise a specific dollar figure, but we have watched plenty of West Palm Beach homeowners offset a meaningful chunk of their door cost through mitigation discounts over the life of the door.
What’s the Difference Between Impact French Doors and Regular French Doors?
The difference is the glass package and the frame engineering. Impact french doors use laminated glass that holds together when struck by wind-borne debris, and the frame is built and anchored to withstand the pressure cycling Palm Beach County code requires. Non-impact french doors will not pass a building inspection in West Palm Beach and will not satisfy the wind-borne debris region requirement. In this city, a non-impact french door on an exterior opening is not a cheaper option; it’s an opening that will fail inspection and potentially void your insurance coverage.
Get Your Exact Number
Every opening is different, and the range we’ve given you has variables we cannot resolve without looking at your walls. Call (561) 264-1279 and we’ll measure, quote manufacturer lines side by side on paper, and give you a number that holds. Licensed, insured, background-checked technicians. Free estimates. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving West Palm Beach, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
What Our Customers Say
"Impact windows on the whole house. They handled the permit, the inspection, and gave me a folder with every approval number for the insurance company. My windstorm premium dropped enough to notice."
- Bill T."A casement crank had stripped and the sash was swollen shut. The technician, Ray, fixed the crank on the spot and only then talked about replacement for the three windows that were genuinely done. That is why the whole street uses them now."
- Eleanor G."Whole-house window replacement at 71 years old is not something you want to do twice. Dale walked the house himself for the quote. Crew was the same three men all four days, and the foreman knew every window by room."
- Pat and Ray L.



Before
After
Before
After
Before
After