Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Lake Park
Window installation in Lake Park usually runs $850 to $3,400 per opening depending on whether we’re doing a simple insert replacement or a full-frame tear-out, and most jobs finish in one to three days. If you live in one of the older CBS cottages off Park Avenue or along the Lagoon side of Federal Highway, you’re likely looking at a full-frame replacement rather than a pocket insert because the original jalousie frames cannot accept modern impact-rated glazing. Call (561) 264-1279 and we’ll walk you through what your specific house needs before anyone picks up a pry bar.
Our crews know Lake Park block by block. We know which 1950s bungalows still have their original jalousie frames and which streets see the heaviest salt-air corrosion off the Lake Worth Lagoon. That local knowledge matters when it comes to scoping a job correctly the first time instead of discovering surprises mid-install.
Why TruePane Windows & Doors Is Lake Park’s Preferred Window Installation Company
Dale Kessler founded this company in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. We have spent the years since building a reputation in Lake Park as the crew that shows up when we say we will, measures every opening twice, and stands behind the work in writing. Our Window Installation team is made up of background-checked, uniformed technicians, many of whom trained as apprentices under a second-generation glazier and now run their own trucks.
Lake Park homeowners call us because the houses here demand a specific kind of attention. The 1940s to 1960s concrete block construction is solid, but the original window systems were not built for 110+ mph wind-load requirements or for decades of salt-air exposure. We scope every job against current Palm Beach County impact-glazing code before we quote, so you are not surprised by a permit correction or a rework order later. Our standing offer still applies in Lake Park: maintenance check, a free written repair estimate, and a permanent 5% discount for seniors and veterans. A live person answers the phone 24/7, not a callback form.
Our Window Installation Services in Lake Park
Casement Windows
Casement windows are a frequent choice for Lake Park homes because they seal tightly against wind-driven rain coming off the Lagoon. A full-frame casement replacement on a 1950s CBS cottage typically runs $1,400 to $2,900 per window here depending on size and whether we are rebuilding the jamb from salt-corroded framing. The crank hardware needs to be marine-grade in this environment or you will be replacing operators within five years.
Awning Windows
Awning windows work well on the low-sill openings common in Lake Park ranch homes, and because they hinge at the top, they let you keep ventilation going during a light rain without pulling water into the house. Expect $950 to $2,200 per opening for a full-frame awning replacement. We typically pair these with casement units on the upper wall of enclosed porches and utility rooms where downward-shedding water matters.
Fixed and Picture Windows
A fixed picture window facing the Intracoastal gives you the view without the moving parts that fail in salt air. In Lake Park, a large impact-rated picture window with low-E glass and argon fill generally falls between $1,100 and $3,400 installed depending on the opening size and whether we are reinforcing the header. On a 1960s CBS wall, the header work is often the bigger variable than the glass itself, and we inspect that before we price.
Single and Double Hung Windows
Single hung and double hung replacements are the most common insert jobs we do in Lake Park when the original frame is still square and structurally sound. A standard double hung runs $850 to $1,900 per window if we are doing a pocket replacement into an intact opening. If the frame has salt pitting or the sill is rotted from years of ungraded drainage, the price moves into full-frame territory fast, and we will show you exactly where the line falls during the estimate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Park
We are an authorized installer for more than a dozen manufacturer lines and we quote them side by side on paper so you can see the differences in writing. In Lake Park, we frequently install Andersen and PGT for impact-rated applications, and ES Windows when a homeowner wants a high-end aluminum-clad look that will hold up to the marine air. We also work with ECO Window Systems for mid-range energy-efficiency retrofits where impact glass is not required by the opening’s wind zone. Because our trucks run a regular route through Lake Park, parts and service calls do not sit in a queue behind distant dispatch.
Common Window Installation Problems We See in Lake Park Homes
- Salt-air corrosion on aluminum frames and hardware. Homes within a quarter mile of the Lake Worth Lagoon see sashes seize within a decade when non-marine-grade framing was used. We replace these with painted or cladded frames rated for the exposure category, and we replace every operator and hinge rather than trying to salvage corroded hardware.
- Non-impact jalousie windows that cannot be brought to code. Lake Park has one of the densest concentrations of original jalousie windows in Palm Beach County. Film, plywood, and accordion shutters do not bring a jalousie opening into compliance, so the only legal path is full removal and replacement with a rated impact unit.
- Seal failure and fogged panes in early single-pane glazing. The daily thermal swing near the Lagoon stresses older seals until the glass unit fogs and loses its insulating value permanently. A fogged pane is not cosmetic, and in an impact-rated opening it needs a full replacement rather than a reseal.
- Water intrusion at the sill on slab-on-grade homes. Many Lake Park cottages sit on flat lots with no meaningful grade fall away from the foundation. If the original window was not flashed with modern butyl tape and a sloped sill pan, we find damp drywall and rotted framing at the bottom corners. We address the drainage plane before the new window goes in.
Pricing for Window Installation in Lake Park, FL
Here is what we actually quote in Lake Park, not a national generic. A basic single or double hung insert runs $850 to $1,900 per window. A full-frame casement or awning with impact-rated glazing and marine-grade hardware runs $1,400 to $3,400 depending on the opening size, the header condition, and whether we are rebuilding a corroded jamb. Fixed picture windows fall between $1,100 and $3,400. The biggest variable on a Lake Park job is usually the frame tear-out: jalousie openings are labor-intensive to remove cleanly and always require new framing, new flashing, and re-trimming. Permits and inspections add $250 to $600 per project depending on the number of openings, and we handle both for you. Every quote is a written line-item estimate with both warranty layers registered before the truck leaves the driveway. Call (561) 264-1279 to schedule a free estimate.
We Also Serve Cities Near Lake Park
If you live just outside town, we run the same crews to West Palm Beach, Westgate, Palm Beach Shores, and North Palm Beach on a weekly route. The permitting and wind-load requirements are similar across most of the county, so our Window Installation in Lake Park experience carries directly into those nearby neighborhoods.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Lake Park
Jalousie windows were the standard mid-century choice for South Florida cottages because they provide full ventilation during humid months, and Lake Park’s building boom ran from the 1940s into the 1960s, exactly when jalousie production peaked. You cannot bring a jalousie opening into Palm Beach County code compliance with film, plywood, or accordion shutters because the louver frame itself cannot carry a wind-load rating. The opening must be fully removed and replaced with an impact-rated unit. Call (561) 264-1279 and we will tell you what your specific openings require.
Salt-air from the Lagoon settles on aluminum frames and hardware continuously, accelerating pitting and corrosion far faster than homes even a mile inland experience. Within a decade, non-marine-grade operators begin to bind, and the frame itself can corrode where the finish is scratched or worn. This is why we specify painted or cladded framing rated for marine exposure on every Lake Park install, not just on the units facing the water. Schedule a free inspection at (561) 264-1279 if your windows are getting harder to crank.
Window replacement in Lake Park requires a Palm Beach County building permit when you are changing the frame, altering the opening size, or switching from non-impact to impact-rated glazing, and the work must pass a county inspection tied to wind-load compliance. Simple insert replacements into an intact, code-compliant frame may fall under a less involved scope, but every job we do in Lake Park gets permitted and inspected when required. We pull the permit for you and schedule the inspection as part of the bid. Call (561) 264-1279 for a breakdown of what your project needs.
Impact-rated glazing means the glass unit and frame together are tested to withstand a specific wind-borne debris impact and pressure cycle under the Florida Building Code, which Palm Beach County enforces at a 110+ mph exposure category for most of Lake Park. Any window you replace in Lake Park must meet the wind-load requirements for its opening, and because the town sits directly on the Lagoon, the exposure category is typically higher than inland areas of the county. We quote impact-rated assemblies from PGT, Andersen, and ES Windows as standard on this side of town. Call (561) 264-1279 for a written spec on your openings.
No. Fog between the panes means the glass unit’s internal seal has failed, and the window has lost essentially all of its insulating value. In a non-impact opening it is a thermal loss you can feel on a hot afternoon. In an impact-rated or code-required opening, a fogged unit also no longer meets the original wind-load performance standard and should be replaced. We replace failed glass units as a standalone service when the frame is still sound, and as part of a full-frame job when the frame has reached the end of its life. Call (561) 264-1279 and we will tell you which path applies to your windows.
Key Takeaways
- Lake Park’s 1940s to 1960s CBS housing stock has a dense share of original jalousie windows that cannot be shuttered into compliance and must be fully replaced.
- Salt-air from the Lake Worth Lagoon corrodes standard aluminum faster than inland homes see, so marine-grade framing and hardware matter on every opening.
- Full-frame tear-outs run $1,400 to $3,400 per window in Lake Park; simple inserts fall closer to $850 to $1,900.
- We pull the permit, we register both warranty layers in writing before we leave, and we stand behind every job with our Done Right Promise.
On a 1950s bungalow off Park Avenue, our crew pulled out a full wall of corroded aluminum jalousie windows facing the Lagoon. The original frames had salt-air pitting that had spread into the jambs, so we did a complete tear-out and rebuilt the openings with fusion-welded, impact-rated casement windows, low-E glass with argon fill, flashed with butyl tape and re-trimmed to match the stucco. That is the work Lake Park calls us for, and it is the reason Dale Kessler keeps the whiteboard rule: if the pane is not true, the job is not done.
Call (561) 264-1279 to schedule your free estimate. A live person answers, and we will walk your house with a written quote in hand before we do anything else.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Park and surrounding Palm Beach County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.