Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Lake Park, FL | TruePane Windows & Doors
If you own a CGI window or need Lake Park Door Installation for one that’s binding, weeping, or failing to close square, we service it. TruePane Windows & Doors is an independent CGI service provider, not a manufacturer affiliate, and we’ve been called out to hundreds of homes along this stretch of the Lake Worth Lagoon where salt air chews through frames and hardware faster than anywhere else in Palm Beach County. We know what fails on CGI Sentinel, Estate, and Targa lines in this specific marine environment, and we stock the parts to fix most issues in a single visit. Call (561) 264-1279 for a free estimate.
Why Lake Park Residents Choose Us for CGI Service
Dale Kessler grew up in Northwood Hills and spent enough summers watching his father re-glaze storefront windows along Dixie Highway to know he wanted to work with glass for a living. He trained in building construction technology at Palm Beach State College, then spent the better part of two decades measuring, setting, and sealing windows and doors across Palm Beach County before starting TruePane in 2008. That’s the background behind our approach to CGI sales & service: we treat every frame as if it were going into a house on the lagoon, because in Lake Park, it usually is.
What sets us apart for Lake Park homeowners comes down to what we put in writing. Both manufacturer warranty layers registered before our truck leaves the driveway. A Done Right Promise with no paperwork fights. Background-checked, uniformed technicians who measure every rough opening twice. And a live person answers our phone 24 hours a day, seven days a week. No voicemail tree, no regional call center. When a Lake Park homeowner calls about a seized CGI slider at 9:00 on a Saturday night, a person picks up.
Common CGI Windows & Doors Problems We Solve in Lake Park
- Salt-air pitting and white powder corrosion on aluminum frames. CGI’s aluminum lines hold up well when maintained, but Lake Park’s position directly on the Lake Worth Lagoon means weep holes and unsealed screw heads collect salt scale years before the same frame would show wear a few miles inland. We clean, neutralize, and reseal these points before the corrosion eats into the frame’s structural channel.
- Fogging or desiccant failure in insulated glass units. Repeated thermal cycling combined with salt-laden humidity is hard on IGUs, and we see failed seals on CGI units in Lake Park that are five to eight years younger than identical units in inland communities. When the desiccant saturates, no cleaning fixes it. The glass unit comes out and a new sealed unit goes in.
- Worn or snapped operators and hinges on casement and awning windows. Many of Lake Park’s older CBS cottages still have their original openings retrofitted with CGI casement hardware. The constant damp-salt cycle corrodes the bronze bushings and gear teeth. We replace with CGI’s own hardware where available; if the part is discontinued, we source marine-grade aftermarket components rated for coastal corrosion.
- Roller and track degradation on CGI sliding glass doors. Sand and salt grit work their way into the bottom track, score the rollers, and eventually seize the door. Homeowners on Lake Shore Drive and along the Kelsey City plat deal with this every few years. We pull the panel, clean and dress the track, and install new stainless rollers rather than replacing the whole door when the frame is still sound.
- Jalousie-to-CGI full-frame replacements in non-standard openings. Lake Park’s post-WWII concrete-block cottages frequently have original jalousie openings with rough dimensions that don’t match any standard CGI size. Film, plywood, and accordion shutters will not bring a jalousie into wind-borne debris compliance. These openings require custom sizing or masonry infill before a CGI impact window can be set.
CGI Service in Lake Park: What Local Conditions Mean for Your Equipment
Lake Park’s residential core sits within a quarter mile of the Lake Worth Lagoon, and the housing stock is dominated by modest 1940s through 1960s concrete-block-and-stucco ranch homes and small cottages, a large share of which retain original jalousie louver windows or early single-pane aluminum sliders. Neither comes close to meeting current Florida Building Code impact requirements. This creates a situation unique to Lake Park: mandatory full-frame jalousie tear-outs are the norm, not the exception, because jalousie windows cannot be brought into hurricane compliance through film or shutters alone. They must be fully removed and replaced with Lake Park Window Installation. Because the rough openings on these older cottages are frequently non-standard, full-frame CGI replacements often require custom sizing or masonry infill, a challenge virtually absent in neighboring North Palm Beach’s larger, newer homes. If the pane is not true, the job is not done, and on a 1962 CBS cottage with a rough opening that’s 3/8 inch out of square on both jambs, truing the pane means building the opening right before the window goes in.
CGI Models & Products We Service in Lake Park
We service and install the full CGI residential lineup: Sentinel Series impact windows, Estate Collection impact windows, Targa Series impact windows, and Commercial Series impact windows. Our parts approach is simple. We use CGI’s own replacement parts when available, because exact fit and finish matter on a window that’s rated for 130+ mph wind pressures. For discontinued or backordered hardware, we source marine-grade aftermarket components rated specifically for coastal corrosion. When existing CGI frames have widespread corrosion or failed thermal breaks, we tell you honestly and recommend full-frame replacement rather than patching with inserts. We keep common CGI hardware and weatherstripping on our trucks serving the Lake Park area, which speeds up most repair calls. For full-frame jobs, we measure every opening twice and quote manufacturer lines side by side on paper, so you see exactly what you’re buying before we start.
CGI Service Pricing in Lake Park
CGI service pricing depends on what’s actually wrong. Hardware replacement (operators, hinges, rollers) typically runs $185 to $420 including parts and labor. Glass unit replacement for a fogged IGU runs $250 to $520 per sash, depending on glass size and Low-E coating. Full-frame CGI Sentinel impact window replacements generally start around $900 to $1,400 per opening, and custom sizing or masonry infill on those non-standard Lake Park jalousie openings adds to the scope. Full-frame impact sliding glass doors start around $2,200 and go up with size and design pressure rating. A free estimate includes a site visit, measurements, a written line-item quote, and a direct answer on whether repair or replacement makes sense for your specific frame. Call (561) 264-1279 to schedule yours.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Lake Park
Yes. CGI Sentinel Series impact windows are Florida Building Code approved for wind-borne debris protection and meet Palm Beach County’s 110+ mph exposure category requirements. Lake Park’s building department accepts them when the installation is permitted, inspected, and properly documented. We pull permits on every full-frame replacement and register both warranty layers in writing before we leave the driveway. Call (561) 264-1279 if you need help preparing for a wind mitigation inspection.
No. Jalousie louver windows cannot be brought into wind-borne debris compliance through film, plywood, or accordion shutters. The blades themselves are the weak point, and no covering fixes the frame’s inability to carry a debris-rated opening. The only compliant option is full removal and replacement with an impact-rated window, which is why we do so many full-frame jalousie tear-outs throughout Lake Park’s older blocks. Call (561) 264-1279 and we’ll measure your openings and write a straightforward quote.
CGI’s aluminum frames, especially along weep holes and unsealed screw heads, develop pitting and white powder corrosion faster in Lake Park’s salt-air environment than in inland locations. Vinyl frames don’t corrode, but they expand and contract more with temperature swings, which can stress seals over time. For homes directly on the lagoon, we recommend marine-grade aluminum with proper sealant and hardware treatment. Our crews know exactly where salt scale accumulates on CGI frames and address it before it becomes a structural problem. Call (561) 264-1279 for a free inspection.
In protected inland Florida locations, a CGI impact window can last 25 to 35 years. In Lake Park, a few blocks from the Lake Worth Lagoon, expect 18 to 25 years depending on how well the frame was sealed at installation and how frequently the hardware gets cleaned and lubricated. Salt air accelerates every failure mode, so we recommend an annual inspection for homes within a quarter mile of the water. Call (561) 264-1279 to schedule a service check and keep your windows functioning for as long as they should.
Yes. This is a large share of our Lake Park work. The original jalousie rough openings on 1940s through 1960s concrete-block cottages rarely match modern CGI frame sizes, so we either custom-size the window or perform masonry infill to bring the opening to a standard dimension. We quote the full scope including framing, flashing, stucco patching, and the CGI window itself before any work begins. Call (561) 264-1279 and we’ll measure your openings and give you an honest price.
Service Areas Near Lake Park
We serve Lake Park and the surrounding communities along the coastal corridor. Our Lake Park service area covers the full town from Kelsey City to Lake Shore Drive. We also provide CGI service in West Palm Beach for homeowners just south of the city line, and CGI service in Westgate for the neighborhoods along 45th Street. Homeowners in North Palm Beach, Palm Beach Shores, and Riviera Beach call us for the same independent CGI service with no manufacturer affiliation.
Book Your CGI Service in Lake Park Today
If you’re dealing with a fogged CGI IGU, a seized slider, or a jalousie opening that needs to come out before hurricane season, call (561) 264-1279. We measure every opening twice, write a line-item quote on paper, and stand behind the work with the Done Right Promise. Free estimates for every Lake Park homeowner, senior and veteran discounts applied without being asked.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Park since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.